Micron SSD 64GB MTFDDAA064MAM-1J1 User Manual

Product codes

MTFDDAA064MAM-1J1

C400v 1.8-Inch SATA NAND Flash SSD

MTFDDAA064MAM

Features

• Micron

25mm MLC NAND Flash

• RoHS-compliant package
• SATA 6 Gb/s interface
• ATA modes supported

– PIO mode 3, 4
– Multiword DMA mode 0, 1, 2
– Ultra DMA mode 0, 1, 2, 3, 4, 5

• Industry-standard, 512-byte sector size support
• Hot-plug capable
• Native command queuing support with 32-com-

mand slot support

• ATA-8 ACS2 command set compliant
• ATA security feature command set and password

• Secure erase (data page) command set: fast and se-

cure erase

• Self-monitoring, analysis, and reporting technology

(SMART) command set

• Performance

1, 2

– Sequential 128k READ: up to 500 MB/s
– Sequential 128k WRITE: up to 95 MB/s
– Random 4k READ: up to 45,000 IOPS
– Random 4k WRITE: up to 20,000 IOPS
– PCMark

Vantage (HDD test suite score): up to

65,000

– READ/WRITE latency: 55µs

• Reliability

– MTBF: 1.2 million device hours

– Static and dynamic wear leveling
– Uncorrectable bit error rate (UBER): <1 sector

per 10

bits read

• Low power consumption

– <200mW TYP

• Endurance: Total bytes written (TBW) – 36TB
• Capacity

(unformatted): 64GB

• Mechanical – 5mm height

– Micro SATA connector: 3.3V ±5%
– 1.8-inch drive: 78.5mm x 54mm x 5mm
– Weight: 45g (MAX)

• Field-updateable firmware
• Operating temperature:

– Commercial (0°C to +70°C)

Notes: 1. Typical I/O performance numbers as meas-

ured using Iometer with a queue depth of
32 and write cache enabled.

2. 4K transfers used for READ/WRITE latency

values.

3. The product achieves a mean time between

failure (MTBF) based on population statis-
tics not relevant to individual units.

4. Active power measured during execution of

MobileMark

2007 with DIPM (device-initi-

ated power management) enabled.

5. 1GB = 1 billion bytes; formatted capacity is

less.

6. Drive case temperature.

C400v 1.8-Inch NAND Flash SSD

Features

PDF: 09005aef84559b26
realssd_c400v_1_8.pdf - Rev. D 09/11 EN

Micron Technology, Inc. reserves the right to change products or specifications without notice.

Products and specifications discussed herein are subject to change by Micron without notice.