Intel S2600JFQ BBS2600JFQ User Manual
Product codes
BBS2600JFQ
Intel®
Server Board S2600JF TPS
BIOS Setup Interface
Revision 1.3
Intel order number G31608-004
107
Table 46. Setup Utility
– Boot Options Screen Fields
Setup Item
Options
Help Text
Comments
Boot Timeout
0 - 65535
The number of seconds the BIOS should
pause at the end of POST to allow the user
to press the [F2] key for entering the BIOS
Setup utility.
pause at the end of POST to allow the user
to press the [F2] key for entering the BIOS
Setup utility.
Valid values are 0-65535. Zero is the
default. A value of 65535 causes the
system to go to the Boot Manager menu
and wait for user input for every system
boot.
default. A value of 65535 causes the
system to go to the Boot Manager menu
and wait for user input for every system
boot.
After entering the
necessary timeout, press
the Enter key to register
that timeout value to the
system. These settings
are in seconds.
necessary timeout, press
the Enter key to register
that timeout value to the
system. These settings
are in seconds.
Boot Option #x
Available boot
devices.
devices.
Set system boot order by selecting the boot
option for this position.
option for this position.
Hard Disk Order
Set the order of the legacy devices in this
group.
group.
Displays when one or
more hard disk drives are
in the system.
more hard disk drives are
in the system.
Network Device
Order
Order
Set the order of the legacy devices in this
group.
group.
Displays when one or
more of these devices are
available in the system.
more of these devices are
available in the system.
Delete Boot Option
Remove an EFI boot option from the boot
order.
order.
If the EFI shell is deleted,
it is restored on the next
system reboot. It cannot
be permanently deleted.
it is restored on the next
system reboot. It cannot
be permanently deleted.
EFI Optimized Boot
Enabled
Disabled
If enabled, the BIOS only loads modules
required for booting EFI-aware Operating
Systems.
required for booting EFI-aware Operating
Systems.
Grayed out when [SW
RAID] SATA Mode is
Enabled. SW RAID can
only be used in Legacy
Boot mode.
RAID] SATA Mode is
Enabled. SW RAID can
only be used in Legacy
Boot mode.
Boot Option Retry
Enabled
Disabled
If enabled, this continually retries non-EFI-
based boot options without waiting for user
input.
based boot options without waiting for user
input.
USB Boot Priority
Enabled
Disabled
If enabled newly discovered USB devices
will be put to the top of their boot device
category.
If disabled newly discovered USB devices
will be put at the bottom of the respective
list
will be put to the top of their boot device
category.
If disabled newly discovered USB devices
will be put at the bottom of the respective
list
Static Boot Ordering Enabled
Disabled
[Disabled] - Devices removed from the
system are deleted from Boot Order Tables.
[Enabled] - Devices removed have positions
in Boot Order Tables retained for later
reinsertion.
system are deleted from Boot Order Tables.
[Enabled] - Devices removed have positions
in Boot Order Tables retained for later
reinsertion.
When the option changes
to “Enabled” from
“Disabled”, it will enable
Static Boot Ordering
(SBO) from the next boot
onward, and also the
current Boot Order will be
stored as the SBO
template.
to “Enabled” from
“Disabled”, it will enable
Static Boot Ordering
(SBO) from the next boot
onward, and also the
current Boot Order will be
stored as the SBO
template.
When the option changes
to “Disabled” from
“Enabled”, it will disable
SBO and the SBO
template will be cleared.
to “Disabled” from
“Enabled”, it will disable
SBO and the SBO
template will be cleared.
Otherwise it will retain the
current Enabled/Disabled
current Enabled/Disabled