Intel S2600JFQ BBS2600JFQ User Manual

Product codes

BBS2600JFQ

Platform Management Functional Overview

Intel®

Server Board S2600JF TPS

Revision 1.3

Intel order number G31608-004

  Up to 16 Shared GPIO available for host processor
  Programmable Wake-up Event Support
  Plug and Play Register Set
  Power Supply Control

3.6.1.1

Keyboard and Mouse Support

The server board does not support PS/2 interface keyboards and mice. However, the system
BIOS recognizes USB specification-compliant keyboards and mice.

3.6.1.2

Wake-up Control

The super I/O contains functionality that allows various events to power on and power off
the system.

3.6.2

Graphics Controller and Video Support

The integrated graphics controller provides support for the following features as implemented on
the server board:

  Integrated Graphics Core with 2D Hardware accelerator
  DDR-2/3 memory interface supports up to 256Mbytes of memory
  Supports all display resolutions up to 1600 x 1200 16bpp @ 60Hz
  High speed Integrated 24-bit RAMDAC

The integrated video controller supports all standard IBM VGA modes. The following table
shows the 2D modes supported for both CRT and LCD:

Table 13. Supported Video Modes

2D Mode

Refresh Rate (Hz)

2D Video Mode Support

8 bpp

16 bpp

32 bpp

640x480

60, 72, 75, 85, 90,
100, 120, 160, 200

Supported

800x600

60, 70, 72, 75, 85,
90, 100, 120,160

Supported

1024x768

60, 70, 72,
75,85,90,100

Supported

1152x864

43,47,60,70,75,80,85 Supported

Supported

1280x1024

60,70,74,75

Supported

1600x1200**

Supported

Note:

Video resolutions at 1600x1200 are only supported through the external video
connector located on the rear I/O section of the server board. Utilizing the optional
front panel video connector may result in lower video resolutions.

The server board provides two video interfaces. The primary video interface is accessed using a
standard 15-pin VGA connector found on the back edge of the server board.

In addition, video

signals are routed to a 14-

pin header labeled “FP_Video” on the leading edge of the server

board, allowing for the option of cabling to a front panel video connector.

Attaching a monitor to

the front panel video connector will disable the primary external video connector on the back
edge of the board.