Trendnet TPE-T80 Leaflet
FEATURES
• IEEE 802.3at and IEEE 802.3af Power over Ethernet (PoE) compliant
• Support PoE class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
• 8 x 10/100Mbps Auto-MDIX PoE+ ports
• Provides up to 30 watts per PoE port
• 1.6 Gbps switching fabric
• 8 DIP switches turns PoE support on/off per port
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 1.25Mbits RAM Data Buffer
• 4K MAC address entries
• 250 watt Internal Power supply: AC input (90~260V/AC, 50~60Hz)
• Plug and Play
• Sturdy metal enclosure
• 3-year limited warranty
• Support PoE class 2 (7 watts) , 3 (15.4 watts), and 4 (30 watts)
• 8 x 10/100Mbps Auto-MDIX PoE+ ports
• Provides up to 30 watts per PoE port
• 1.6 Gbps switching fabric
• 8 DIP switches turns PoE support on/off per port
• Full wire-speed non-blocking reception and transmission
• Store-and-forward switching method
• Back pressure Flow Control for half-duplex mode
• IEEE 802.3x Flow Control for full-duplex mode
• 1.25Mbits RAM Data Buffer
• 4K MAC address entries
• 250 watt Internal Power supply: AC input (90~260V/AC, 50~60Hz)
• Plug and Play
• Sturdy metal enclosure
• 3-year limited warranty
TPE-T80
rev: 01.13.2012
8-Port 30 Watt 10/100Mbps PoE+ Switch
TPE-T80 (v1.0R)
TRENDnet’s 8-Port 30 Watt 10/100Mbps PoE+ Switch, model
TPE-T80, reduces equipment and installation costs by delivering data and power
over existing Ethernet cables. The IEEE 802.3at PoE+ standard supplies up to 30
watts of power per port for devices such as high power wireless access points, PTZ
(Pan Tilt Zoom) Internet cameras, and VoIP telephony systems.
Auto sensing technology delivers up to 30 watts to 802.3at PoE+, 15 watts to
802.3af PoE, and only data to non-PoE devices. GREENnet technology reduces
energy costs by up to 75% when the switch is not in use.
Boost offi ce effi ciency and reduce network congestion with a total switching
capacity of 1.6Gbps. LED indicators display device status for easy power
management and troubleshooting. An internal power supply reduces clutter and DIP
switches on the front panel allow managers to manually cut PoE power to a given
port. Use this switch with TRENDnet PoE Splitters to install non-PoE devices in
remote locations.
PRODUCT OVERVIEW
• 30 watts per PoE+ port
• Reduces equipment cost by delivering data and power over existing network cables
• 8 x 10/100Mbps PoE+ ports
• 1.6 Gbps switching capacity
• Up to 75% GREENnet power savings
• Reduces equipment cost by delivering data and power over existing network cables
• 8 x 10/100Mbps PoE+ ports
• 1.6 Gbps switching capacity
• Up to 75% GREENnet power savings