Intel BXSTS200PNRW User Manual
Intel
24
*Dual port module shown
AXX2FDRIBIOM
920627
UPC/EAN to be
udpated
Dual port, FDR 56GT/S (per port capable) speed
Infiniband module, with QSFP connector, based on
Mellanox CX3 MT27508A1-FCCR-FV chip. Note, due to
PCIe3 x8 bandwidth limitation, both ports can‟t
simultaneously function at full speed.
Includes three screws
Infiniband module, with QSFP connector, based on
Mellanox CX3 MT27508A1-FCCR-FV chip. Note, due to
PCIe3 x8 bandwidth limitation, both ports can‟t
simultaneously function at full speed.
Includes three screws
1
AXX4P1GBPWLIOM
917911
735858241083
5032037035835
Quad port 1GbE IO Module based on Intel
®
Ethernet
Controller I350
Includes three screws
Includes three screws
1
Mezz. card: 8 ports
RMS25CB080
917084
735858238977
5032037033756
PCIe card: 8 ports
RMS25PB080
917056
00735858238946
5032037033725
Mezz. card: 4 ports
RMS25CB040
917085
735858238984
5032037033763
PCIe card: 4 ports
RMS25PB040
917078
735858238953
5032037033732
HW RAID SAS Module: 4/8 port internal SAS-2.1
version, Full HW RAID, LSI MegaRAID-based
Firmware, 1GB DDR3, R0,1,10,5,50,6,60
Supports Battery Backup Unit. Based on LSI2208.
Mezzanine card form factor
version, Full HW RAID, LSI MegaRAID-based
Firmware, 1GB DDR3, R0,1,10,5,50,6,60
Supports Battery Backup Unit. Based on LSI2208.
Mezzanine card form factor
– does not occupy PCIe
slot, only compatible with systems enabled with SAS
Module connector.
PCIe card form factor
Module connector.
PCIe card form factor
– compatible with all EPSD
boards, requires PCIe x8 slot.
5
Mezz. card: 8 ports
RMS25JB080
917087
735858239004
5032037033787
Mezz. card: 4 ports
RMS25JB040
917088
735858239011
5032037033794
PCIe card: 8 ports
RMS25KB080
917089
PCIe card: 4 ports
Entry-raid SAS Module: internal SAS-2.1 version, Entry-
level LSI IR-based RAID 0,1,1E/straight SAS
Based on LSI2308.
Mezzanine card form factor
level LSI IR-based RAID 0,1,1E/straight SAS
Based on LSI2308.
Mezzanine card form factor
– does not occupy PCIe
slot, only compatible with systems enabled with SAS
Module connector.
PCIe card form factor
Module connector.
PCIe card form factor
– compatible with all EPSD
boards, requires PCIe x8 slot.
5