Projecta Pro-Lift Pivot 65 11730001 Data Sheet

The Pro-Lift is an electrically operated projector lift 230 volt (50Hz) with a usage of no more than 3 Ampere for pro-

jectors weighing up to 11 kg. The mount shall be a fabricated mild steel design and consist of a 14-gauge welded 

support frame, 14-gauge welded tilting frame, 18-gauge ceiling tile holder and 18-gauge ceiling tile trim piece. Prod-

uct shall have a prewired 120V AC grounded duplex receptacle and a prewired  built-in switch for installer operation. 

Product shall have a commercial powder coat white fi nish. Designed to mount in suspended ceiling or drywall ceiling. 

Front to back, left to right, vertical, and tilt projector adjustments. Complete with a universal projector mount. To 

be complete with three position control switch with cover plate. Optional low voltage, radio frequency or infrared, 

remotes available.

Pro-Lift Pivot 65

43

33

65

40

40

33

Pro-Lift Pivot 82

55

41

82

52

52

42

P.O. Box 191, 6000 AD Weert

Franklinstraat 14

6003 DK Weert

The Netherlands

Tel: +31 (0) 495580840

Fax: +31 (0) 495580845

sales@projectascreens.com

www.projectascreens.com

Pro-Lift Pivot 65

11

19

21

Pro-Lift Pivot 82

11

21

23

D

IMENSIONS

Project:                 

Architect:

Phone:

Contractor:

Phone:

Supervisor:

Phone:

Supplier:

Date:

Revised:

_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________
_________________________

Specifi cations subject to change.