Stec UFM 4GB SLUFM4GU2TUI-A User Manual
Product codes
SLUFM4GU2TUI-A
SLUFMxxxU2TU(I)-y Data Sheet
STEC™ Embedded USB Flash Module
61000-07022-108, September 2012
11
4.3
Shock, Vibration, and Humidity
Table 12: Shock, Vibration & Humidity
Parameter
Value
Shock
1500G Peak, 0.5m pulse duration, 5 pulses, 6 axes
(per JESD22-B110)
Vibration
20G Peak, 20-2000 Hz, 4 cycles per direction (X, Y and Z)
(per JESD22-B103)
Humidity
85°C, 85% RH, Vmax for 500 hrs
(per JESD22-A101)
4.4
Electrostatic Discharge (ESD)
The embedded USB flash module has been tested and approved for immunity from ESD under the
conditions described in Table 13 below.
conditions described in Table 13 below.
Table 13: ESD Rating for USB Flash Module
ESD Type
Value (KV)
Air
2, 4, 8
Contact
2, 4
4.5
Mean Time Between Failure (MTBF)
STEC estimates the Mean Time Between Failure (MTBF) using a prediction methodology based on
reliability data for the individual components in the embedded USB flash module. Table 14 below
summarizes the prediction results for the embedded USB flash module, based on the following two
methodologies:
reliability data for the individual components in the embedded USB flash module. Table 14 below
summarizes the prediction results for the embedded USB flash module, based on the following two
methodologies:
Telcordia Special Report SR-332, Reliability Prediction Procedure for Electronic Equipment.
MIL-HNBK-217
The analysis was performed using Relex Software.
Table 14: USB Flash Module MTBF
Product
Condition
MTBF (hours)
SLUFM4GU2TU-A
Telcordia SR-332, GB, 25°C,
MIL-HNBK-217
>8,000,000
SLUFM8GU2TU-A
Telcordia SR-332, GB, 25°C,
MIL-HNBK-217
>7,000,000
4.6
Standards Compliance
The embedded USB flash module complies with the following standards:
CE - EN 55022/55024
FCC - Class B for Information Technology
UL 60950
RoHS-6
USB 2.0
– Mass Storage Class