Fluke FI1000-ST-TIP User Manual

Page of 7
Extremely short event and attenuation dead zone  
The OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event 
dead zone (0.5 m typical for MM) and attenuation dead zone (2.2 m typical for MM and 3.6 m  
typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and 
measure closely spaced faults where no other OTDR can in today’s connector-rich data center and 
storage area environments.
Two second trace per wavelength     
Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, 
a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then 
analyzes the data and displays it as an EventMap event, Table or Trace. The end result is less time 
spent testing and more time performing other tasks.
DataCenter OTDR™ mode  
With a simple one-touch selection, users enter DataCenter OTDR mode – without setup time for fine  
tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters –  
end-detection algorithms, pulse widths, etc – without getting confused by the short links or  
number of connectors.
Graphical EventMap™ view        
To eliminate the learning curve associated with reading an OTDR trace, OptiFiber Pro’s advance logic 
automatically interprets the information to create a detailed and graphical map of events that in-
cludes connectors, splices and anomalies. To accommodate different preferences, users can easily 
switch between the EventMap, the Event Table and the Trace for test details. Any faulty events will 
be highlighted with RED icons to facilitate quick troubleshooting.
Key features
DataCenter OTDR mode
Extremely short event and attenuation dead zone
Graphical EventMap view