Intel S2600JF BBS2600JF User Manual
Product codes
BBS2600JF
Intel®
Server Board S2600JF TPS
Platform Management Functional Overview
Revision 1.3
Intel order number G31608-004
25
independently be configured to support four x1s, two x2s, one x2 and two x1s, or one x4 port
widths.
widths.
From PCH on Intel
®
Server Board S2600JF, PCIe Port8 x1 Gen2 is connected to BMC Gen1
Uplink.
Ports 1-4 are connected to Intel
®
I350 GbE NIC.
The remaining PCIe Gen2 interconnect
(Port 5-7, 1 based numbering) are unused.
3.4.2
Non-Transparent Bridge
PCI Express* Non-Transparent Bridge (NTB) acts as a gateway that enables high performance,
low overhead communication between two intelligent subsystems, the local and the remote
subsystems. The NTB allows a local processor to independently configure and control the local
subsystem, provides isolation of the local host memory domain from the remote host memory
domain while enabling status and data exchange between the two domains.
low overhead communication between two intelligent subsystems, the local and the remote
subsystems. The NTB allows a local processor to independently configure and control the local
subsystem, provides isolation of the local host memory domain from the remote host memory
domain while enabling status and data exchange between the two domains.
The PCI Express* Port 3A of Intel
®
Xeon
®
Processor E5-2600 Product Families can be
configured to be a transparent bridge or a NTB with x4/x8 link width and Gen1/Gen2/Gen3 link
speed. Also this NTB port could be attached to another NTB port or PCI Express* Root Port on
another subsystem. NTB supports three 64bit BARs as configuration space or prefetchable
memory windows that can access both 32bit and 64bit address space through 64bit BARs.
speed. Also this NTB port could be attached to another NTB port or PCI Express* Root Port on
another subsystem. NTB supports three 64bit BARs as configuration space or prefetchable
memory windows that can access both 32bit and 64bit address space through 64bit BARs.
There are three NTB supported configuration:
NTB Port to NTB Port Based Connection (Back-to-Back)
NTB Port to Root Port Based Connection - Symmetric Configuration. The NTB port on
the first system is connected to the root port of the second. The second system’s NTB
port is connected to the root port on the first system making this a fully symmetric
configuration.
the first system is connected to the root port of the second. The second system’s NTB
port is connected to the root port on the first system making this a fully symmetric
configuration.
NTB Port to Root Port Based Connection - Non-Symmetric Configuration. The root port
on the first system is connected to the NTB port of the second system. And it is not
necessary for the first system to be of the Intel
on the first system is connected to the NTB port of the second system. And it is not
necessary for the first system to be of the Intel
®
Xeon
®
Processor E5-2600 product
family.
3.4.3
Universal Serial Bus (USB)
There are fourteen USB 2.0 ports available from Intel
®
C600 PCH.
All ports are high-speed, full-
speed and low-speed capable.
A total of 5 USB 2.0 dedicated ports are used by Intel
®
Server
Board S2600JF. The USB port distribution is as follows:
ServerEngines* BMC PILOT III consumes two USB 2.0 ports (one USB 1.1 and one
USB 2.0)
USB 2.0)
Two rear USB 2.0 ports
One internal USB port for extension of front-panel USB port
Wake on USB is supported on the rear and front panel USB ports for S1 only.
Standby
power on USB ports is not required.
3.4.4
Serial Attached SCSI (SAS) and Serial ATA (SATA) Controller
The Intel
®
C600-A/B chipset provides storage support through two integrated controllers: AHCI
and SCU. By default the server board will support up to six SATA ports: Two single 6Gb/s SATA
ports routed from the AHCI controller to one blue SATA connector labeled “SATA-1” on mother
ports routed from the AHCI controller to one blue SATA connector labeled “SATA-1” on mother