Tripp Lite SR45UBDPWDC User Manual

 

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

Model #: SR45UBDPWDC

 

45U SmartRack enclosure with doors and side panels

48" (1200mm) depth for extra space need for mounting deep equipment

30" (750mm) width for optimizing airflow through cabinet

Installed combo lock for front and rear doors

4 interior vertical posts with unthreaded square hole openings

Meets all enclosure requirements towards PCI DSS (Payment Card Industry

Data Security Standard) Compliance

Ships fully assembled

Massive front to rear ventilation capacity

3000 lb stationary / 2250 lb rolling load capacity

Locking, removable, reversible front and rear doors

Locking, removable side panels

Pre-installed casters and leveling feet

Includes 50 pieces of M6 cage nuts and 50 pieces of M6 screws (equipment

mounting hardware)

 The SR45UBDPWDC is A DEEP and WIDE version of our standard 42U SmartRack with combo locks on the front and rear doors.

This enclosure is 1200mm deep (48") compared to the standard 1050mm deep (42"). This extra depth allows for high density equipment installations.
The SR45UBDPWDC allows extra space for moving the cable management back as well as providing space for mounted equipment that has
hot-swap, removable power supplies out the back of the enclosure.

The SR45UBDPWDC is also 750mm wide (30") compared to the standard 600mm wide (24"). This extra width allows for high density equipment
installations. It allows cable management and PDU mounting off to the sides of the rack in order to keep these items out of the airflow for proper
cooling.

SR45UBDPWDC provides ultimate equipment safety. Front and rear doors, in addition to being reversible and removable, come with the combo
locks installed. The combo handle allows facility managers to closely guard access to specific cabinets. Combos can be easily changed when access
requirements change but retains a key override for management. The SR45UBDPWDC meets enclosure requirements toward PCI DSS compliance

The SR45UBDPWDC houses 3000 lb of standard 19-inch rack equipment in 45U. Its front and rear pairs of vertical rails have square mounting holes
that are adjustable in quarter-inch increments from 4 to 42 inches. Adjustment is quick and an easy-view depth index ensures consistent rail
placement without requiring time-consuming measurements. Each rack space within the enclosure is numbered for ready reference.

The top panel of the SR45UBDPWDC is vented to help remove warm air from the enclosure and draw in cool air by convection. The top panel
includes ports for cable routing, and can be quickly removed without tools. To facilitate cable access, the SR45UBDPWDC is open-bottom.

All components of the SR45UBDPWDC are grounded to the enclosure frame. Front and rear threaded grounding points are provided for connection
to the facility earth ground. The removable front and rear doors feature quick-release ground wires.

To simplify deployment, the SR45UBDPWDC comes with preinstalled casters that enable it to be easily maneuvered into the desired location, where
it can be secured by adjusting the preinstalled levelers. Note: the casters are intended for minor position adjustments and are not designed for
moving the enclosure over long distances.

The SR45UBDPWDC comes with a 5-year product warranty. As part of the SmartRack family, the SR45UBDPWDC is compatible with Tripp Lite’s
extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. 

Package Includes

SR45UBDPWDC Rack Enclosure