Fujitsu T300 7S VFY:T3007SC020IN Data Sheet

Data Sheet

 Fujitsu PRIMERGY TX300 S7 Server 

Page 4 / 10

www.fujitsu.com/fts

Memory notes

Max. 8 memory modules/CPU with UDIMM (low voltage or standard) OR quad-rank RDIMM; max. 12 memory 
modules/CPU with single or dual-rank  RDIMM or single, dual-rank or quad-rank  Load-Reduced (LR) DIMM.
Memory Mirroring with identical modules in both channel pairs of a bank (4 modules per bank), Rank sparing or 
Performance Mode with identical modules in all four channels (4 modules per bank).

Memory options

4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1333 MHz, PC3-10600, DIMM
8 GB (1 module(s) 8 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
16 GB (1 module(s) 16 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM
16 GB (1 module(s) 16 GB) DDR3 LV, registered, ECC, 1600 MHz, PC3-12800, DIMM
32 GB (1 module(s) 32 GB) DDR3 LR LV, registered, ECC, 1333 MHz, PC3-10600, LRDIMM

Memory options

2 GB (1 module(s) 2 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM
4 GB (1 module(s) 4 GB) DDR3 LV, unbuffered, ECC, 1600 MHz, PC3-12800, DIMM

Interfaces

USB ports

10 x USB 2.0 (2x front, 4x rear, 2x internal for backup devices, 1x USB stick, 1x USSD)

Graphics (15-pin)

2 x VGA (thereof 1x front optional)

Serial 1 (9-pin)

1 x serial RS-232-C,  usable for iRMC S3 or system or shared

LAN / Ethernet

2 x Gbit/s Ethernet (RJ45) with upgrade options for additional 2x1 Gbit/s (RJ45), 4x 1 Gbit/s (RJ45) or 2x 10 Gbit/s 
(SFP+)

Service LAN (RJ45)

1 x dedicated management LAN port for iRMC S3  (10/100/1000 Mbit/s)
Service LAN traffic can be switched to shared onboard Gbit LAN port 
or optional Modular LAN 2x10Gbit controller
Front management LAN port as option

Status LEDs

System status (orange / yellow)
Identification (blue)
Hard disks access (green)
Power (amber / green)
At system rear side:
System status (orange / yellow)
Identification (blue)
LAN connection (green)
LAN speed (green / yellow)

Onboard or integrated Controller

RAID controller

4 port for internal 3G SATA and SAS (as upgrade option “Patsburg B”) for HDDs with RAID 0/1/10 or SAS LTO device  
(Intel C600)
additional RAID controller options are described under Components RAID controller

SATA Controller

Intel® C600, 2 x SATA channel for DVD

LAN Controller

Intel® Ethernet Controller I350, 2 x 10/100/1000 Mbit/s Ethernet (I/O acceleration), Modular integrated on-board LAN  
offers upgrade options for additional 2x1 Gbit/s , 4x 1 Gbit/s or 2x 10 Gbit/s.
PXE-Boot via LAN from PXE server, iSCSI boot (also diskless) 

Remote Management Controller

Integrated Remote Management Controller (iRMC S3, 32 MB attached memory incl. graphics controller), IPMI 2.0 
compatible

GPU computing card

1-2 NVIDIA® Tesla™ C2075 GPGPU

Trusted Platform Module (TPM)

Infineon / separate module; TCG V1.2 compliant (option)

Slots

PCI-Express 3.0 x4 (mech. x8)

2 x Full height (2nd processor required)

PCI-Express 3.0 x8

4 x Full height (1 is reserved for Modular RAID controller)

PCI-Express 3.0 x8 (mech. x16)

1 x Full height 

PCI-Express 3.0 x16

2 x Full height (2nd processor required)

PCI-Express 2.0 x4 (mech. x8)

1 x Full height (2nd processor required)

Slot Notes

One PCIe Gen3 x8 slot may be occupied with a modular LAN controller if configured.
One PCIe Gen3 x8 slot may be occupied with a modular RAID controller if configured.
Important: 5 PCIe slots are supported with the first processor. 10 PCIe slots are supported with two processors.

Storage drive bays

3.5-inch or 2.5-inch hot-plug SAS/SATA