IMC Networks iMcV-T1/E1/J1-LineTerm TP 850-18125 Leaflet
Product codes
850-18125
800-624-1070
www.imcnetworks.com
RoHS Compliant
The iMcV-T1/E1/J1-LineTerm Series is perfect for service
providers and enterprise campus networks utilizing T1/E1/J1
twisted-pair circuits. The modules enable users to convert
twisted-pair media to single-mode and mulit-mode fiber and
extend the distance of data transmissions over MAN access
networks up to 80 km.
Available with remote management via the fiber port, the
iMcV-T1/E1/J1-LineTerm Series enables network managers to
conduct loopback testing, and to monitor and manage units
located up to 80 km away. Since IMC Networks’ management
technology functions transparently to the user data, real-time,
end-to-end management is provided at all times. Signal Loss
conditions are propagated using the standards-compliant AIS
signal.
Easily configure and manage converters with the GUI-based
iView²:
Easily configure and manage converters with the GUI-based
iView². As an SNMP management application, iView² gives
network managers the ability to monitor and control IMC
Networks’ products. iView² runs standalone on Windows NT/
XP/2000 or as a Web Server running under IIS. For assistance in
selecting the right version of iView² for your operating system,
visit our web site at: http://www.imcnetworks.com/Products/
iView2.cfm
Features and Benefits
Switch Selectable Protocol
• Operates at T1/J1 or E1 line rates
• Line Terminating function for improved
management and fault isolation
• Convenient DTE/DCE switch
Supports more fiber choices
• Available for multi-mode or single-
mode fiber
• IE-iMcV-T1/E1/J1-LineTerm TP/SFP is
compatible with IMC Networks’ SFPs
and all standard MSA compliant SFP
transceivers
Eases Troubleshooting
• Loopback testing modes, plus optional
SNMP management and LEDs, assist
in diagnosing problems on fiber optic
networks
• Supports fiber and copper remote
loopback control
• Internal test-head function for transmitting
and detecting PRBS test patterns
• LED Line Diagnostics
• Support for Alarm Indication Signals (AIS)
*
for improved fault isolation
• Supports Remote Alarm Indication (RAI)
**
for remote fault notification
• Supports Config Control, a feature that
retains the latest configuration on a module
regardless of how the initial configuration
was setup; whether by DIP Switch or
SNMP Management Module (available on
IE-iMcV-T1/E1/J1-LineTerm TP/SFP)
¹
Management
• Conduct loopback tests, monitor/manage
units via GUI-Based iView²
• Supports secure, out-of-band management
• Diagnostic LEDs (LOS, ER, RAI, PRBS)
iMcV-T1/E1/J1-LineTerm
T1/E1/J1 Standard and Extended Temperature (IE) Line Terminating Modules
iMcV-T1/E1/J1-LineTerm Series products are ideal for extending PBX or legacy
TDM circuits over fiber optics in the local loop and long-haul applications.
Application Example
IE-iMcV-T1/E1/J1-LineTerm
media
converters allow users to link two
PBXs, CSUs or routers and extend the
distance between the two over fiber.
Implementing DDMI enabled SFPs
provides additional information via SNMP.
T1/E1/J1-L
in
E
T
Erm
*
AIS is a standards-compliant alarm indication signal
sent whenever a loss of signal is detected.
**
RAI provides a local LED indication when a fault
exists on the equipment at the far end of the
optical link.
¹
iView² v.1.8.9 and SNMP firmware v. C4 must
be installed to use the Config Control feature.
* SFPs sold separately