Axis T8640 5026-401 Data Sheet
Product codes
5026-401
DATASHEET
AXIS T8640 is an ideal choice for installation of network
cameras where coax cables are already present and may
be very long or inaccessible. For ease of installation and
guaranteed performance, AXIS T8640 features an intui-
tive LED display, which gives confirmation of network
and power status via the cable, with no need to access
remote equipment to check connections.
cameras where coax cables are already present and may
be very long or inaccessible. For ease of installation and
guaranteed performance, AXIS T8640 features an intui-
tive LED display, which gives confirmation of network
and power status via the cable, with no need to access
remote equipment to check connections.
AXIS T8640 can be used in those installations that
require Power over Ethernet transmission over 100 m
(328 ft.). A full-rate network connection is delivered
over maximum cable ranges that far exceed most rec-
ommended distances for analog video installation, so
conversion of all legacy coaxial cable types is predict-
able and reliable.
require Power over Ethernet transmission over 100 m
(328 ft.). A full-rate network connection is delivered
over maximum cable ranges that far exceed most rec-
ommended distances for analog video installation, so
conversion of all legacy coaxial cable types is predict-
able and reliable.
AXIS T8640 enables camera installers to keep the legacy coax cabling when converting an analog
system to digital. It delivers standard PoE and centrally-sourced power with no new cables required.
system to digital. It delivers standard PoE and centrally-sourced power with no new cables required.
AXIS T8640 Ethernet over Coax Adaptor PoE+
Upgrade to IP but keep the coax.
> No need for re-cabling,
keep the coax
> Carries PoE and PoE+
over the coax cable
> Ease of installation
> Reliable configuration
> Supports Axis
network video
products
AXIS T8640 comprises AXIS T8641 Ethernet over Coax
Base Unit PoE+ and AXIS T8642 Ethernet over Coax
Device Unit PoE+. The base unit receives PoE power and
transmits it down the coax. The device unit receives
power from the coax and delivers up to full PoE+ power
to the network camera. An optional power supply can
be used if PoE is not available, or if higher power for the
network camera is needed.
Base Unit PoE+ and AXIS T8642 Ethernet over Coax
Device Unit PoE+. The base unit receives PoE power and
transmits it down the coax. The device unit receives
power from the coax and delivers up to full PoE+ power
to the network camera. An optional power supply can
be used if PoE is not available, or if higher power for the
network camera is needed.