Saeco Automatic espresso machine HD8856/47 HD8856/47 User Manual

13

13

 Once the water has been dispensed, remove and empty the container.

 Repeat the process from step 5 to step 8 until the water tank is empty.

 

Then, continue with step 10.

 At the end, fi ll the water tank again up to the MAX level. Now the ma-

chine is ready for brewing coff ee.

 Note:

When you haven’t used the machine for 2 or more weeks, the machine 
will automatically perform an automatic rinse/self-cleaning cycle after 
you switch it on. Thereafter you need to initiate the manual rinse cycle as 
described above.

The automatic rinse/self-cleaning cycle is also initiated automatically when 
starting up the machine (with cold boiler), when the machine is preparing 
to go into stand-by mode or after you have pressed the “

” button to turn 

off  the machine (after a coff ee has been brewed).

Measuring water hardness is very important for defi ning the frequency in 
which the machine has to be descaled and to install the “INTENZA+” water 
fi lter (for more detail on the  water fi lter see next chapter).

To measure the water hardness follow the steps below:

 Immerse the water hardness test strip provided with the machine in 

water for 1 second. 

 Note:

The test strip can only be used for one measurement.

 Wait for one minute.