Eaton 9135 UPS PPDM EPPDMG6000-3U-7 User Manual
Product codes
EPPDMG6000-3U-7
EATON Two-in-One PPDM (5000/6000 VA) User's Guide
S
164201820 Rev 1 www.eaton.com/powerquality
13
Chapter 2
Installation
This section explains:
S
Equipment inspection
S
UPS setup
S
PowerPass Distribution Module (PPDM) installation
S
PPDM rear panels
Inspecting the Equipment
If any equipment has been damaged during shipment, keep the shipping
cartons and packing materials for the carrier or place of purchase and file
a claim for shipping damage. If you discover damage after acceptance,
file a claim for concealed damage.
cartons and packing materials for the carrier or place of purchase and file
a claim for shipping damage. If you discover damage after acceptance,
file a claim for concealed damage.
To file a claim for shipping damage or concealed damage: 1) File with
the carrier within 15 days of receipt of the equipment; 2) Send a copy of
the damage claim within 15 days to your service representative.
the carrier within 15 days of receipt of the equipment; 2) Send a copy of
the damage claim within 15 days to your service representative.
NOTE Check the battery recharge date on the shipping carton label. If the date has passed
and the batteries were never recharged, do not use the UPS. Contact your service
representative.
and the batteries were never recharged, do not use the UPS. Contact your service
representative.
PPDM Setup
The 9135 UPSs are designed for flexible configurations and can be
installed in a rack or as a standalone cabinet.
installed in a rack or as a standalone cabinet.
If the UPS is already installed and operating, shut down the UPS before
installing the PPDM. See the following section, “UPS Shutdown.”
installing the PPDM. See the following section, “UPS Shutdown.”