Eaton 9135 UPS PPDM EPPDMG6000-3U-7 User Manual

EATON Two-in-One PPDM (5000/6000 VA) User's Guide  

S

  164201820 Rev 1  www.eaton.com/powerquality

1

Chapter 1

Introduction

The PowerPass

®

 Distribution Module (PPDM) is designed to operate

with a 5000/6000 VA Eaton

®

 9135 uninterruptible power system (UPS).

The PPDM allows you to:

S

Replace or upgrade the UPS without losing power to the protected
equipment (see “Using Maintenance Bypass” on page 35).

S

Provide surge protection if the UPS is not present.

S

Provide extra surge protection when the UPS is present.

This manual contains important instructions that you should follow during installation and
maintenance of the UPS and PPDM. Please read all instructions before operating the
equipment and save this manual for future reference.

This UPS contains LETHAL VOLTAGES. All repairs and service should be performed by
AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS
inside the UPS.

S

To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity
controlled, indoor environment, free of conductive contaminants. Ambient temperature
must not exceed 40

°C (104°F). Do not operate near water or excessive humidity

(95% maximum).

S

For PPDM models with hardwired outputs, overcurrent protection for the output AC
circuit(s) is to be provided by others.

S

For PPDM models with hardwired outputs, suitably rated disconnect switches for the
output AC circuit(s) are to be provided by others.