IBM Manager Node 8731A1G User Manual

Product codes
8731A1G
Page of 18
IBM Flex System Manager
8
Automatic detection of hardware failures
 Provides alerts.
 Takes corrective action.
 Notifies IBM of problems to escalate problem determination.
Administrative capabilities, such as setting up users within profile groups, assigning security 
levels, and security governance. 
Bare metal deployment of hypervisors (VMware/ESXi, KVM) through centralized images.
Network management integration
The IBM Flex System Manager management node has two types of  interfaces that can be configured. 
The Eth0 interface (two 1 Gb Ethernet management ports) and the IMM2 network interface are connected 
to the basic Layer 2 switch integrated into the FSM hardware. The integrated switch is connected to the 
Chassis Management Module (CMM) through the chassis internal management network. The CMM is 
connected to a top-of-rack switch that effectively extends the chassis management network outside of the 
chassis and provides a central connection point for all Enterprise Chassis hardware to be managed by the 
IBM Flex System Manager management software. These connections are referred to as the management 
network. The management network is shown in the following figure.
Figure 2. IBM Flex System Manager internal management network connections