Omnitron iConverter Tx/2Tx 8400-0 Leaflet

 

■ The iConverter Redundant Fast Ethernet modules 

provide hot backup, 100 microseconds link redundancy 

for critical applications

 

■ Tx/2Fx model provides 100BASE-TX UTP to two 

100BASE-FX fiber links

 

■ Tx/2Tx models provide 100BASE-TX UTP to two 

100BASE-TX UTP copper links

 

■ Fiber modules support multimode, single-mode, and 

single-fiber with ST, SC and LC connectors

 

■ Auto-negotiation or forced Half/Full-Duplex and 

crossover switches on all UTP ports

 

■ User-selectable link fault detection modes facilitate 

quick fault detection, isolation and reporting

 

■ Management is available with the addition of a 

management module to the chassis

 

■ SNMP management via NetOutlook

provides real-

time port and module information, remote parameter 

configuration and trap notification

 

■ Modules are hot-swappable in 19-Module, 5-Module,  

2-Module or 1-Module chassis

 

■ Lifetime Warranty and free 24/7 Technical Support

The  iConverter Redundant Fast Ethernet managed media 

converters are members of the modular iConverter product 

family, and include:

 

■ Tx/2Tx - 100BASE-TX UTP to dual 100BASE-TX UTP

 

■ Tx/2Fx - 100BASE-TX UTP to dual 100BASE-FX dual fiber 

 

■ Tx/2Fx SF - 100BASE-TX UTP to dual 100BASE-FX single-fiber 
The iConverter Redundant Fast Ethernet modules are designed 

for use in networks that require fiber or copper link redundancy. 

With  a  link  fault  detection  time  of  100  microseconds,  the 

Redundant iConverter modules provide the rapid response time 

required for mission-critical applications.
All ports support Half or Full-Duplex operation, and the UTP 

ports can auto-negotiate or be manually set to a required duplex 

mode. The fiber ports are always set to manual mode.  All ports 

in an application must be set to the same duplex mode.
All ports support Link Propagation (Link Loss Carry Forward), 

Link Segmentation, Remote Fault Detection and Symmetrical 

Fault Detection modes to facilitate quick fault detection, isolation 

and reporting.
iConverter Redundant Fast Ethernet modules are hot-swappable 

and can be mounted in a 19-Module (2U high) or 5-Module  

(1U  high)  rack-mountable  chassis  (19-inch  or  23-inch)  with 

any combination of redundant  AC, 24VDC or 48VDC power 

supplies.  They can also be mounted in a 2-Module AC or 18 

to 60VDC powered chassis, or in a 1-Module AC/DC powered 

chassis. 

The  iConverter Multi-Service Platform consists of Network 

Interface  Devices, T1/E1  multiplexers,  CWDM  multiplexers 

and managed media converters that combine to deliver 

Carrier  Ethernet  and  TDM  services  over  fiber  or  CWDM 

wavelengths.  This flexible architecture supports a wide variety 

of configurations for scalable and reliable fiber connectivity in 

Service Provider and Enterprise networks.