JVC TH-P3E Home Cinema System TH-P3 User Manual

When DVD or USB MEMORY is selected as the source (see 
page 14), the following messages will appear on the TV 
screen.

• The STANDBY lamp goes off when the power is turned on, 

and the lamp lights when the power is turned off.

• A small amount of power is consumed even when the power 

is turned off. This is called standby mode and the STANDBY 
lamp lights in this mode. Unplug the power cord from the 
AC outlet to turn the power off completely.

• You can also turn on the system by pressing the following 

buttons;
– 0 on the center unit
– One of the source selecting buttons on the remote control
– 3 on the center unit.

The buttons on the remote control are used to explain 
most of the operations in this manual. You can use the 
buttons on the center unit same as on the remote control 
for operations unless otherwise noted.

• “OPEN”/“CLOSE”:

Appears when opening or closing the disc tray.

• “NOW READING”:

Appears when the system is reading the disc/file 
information.

• “REGION CODE ERROR!”:

Appears when the Region Code of the DVD VIDEO 
does not match the code the system supports. The 
disc cannot be played back.

• “NO  DISC”:

Appears when no disc is loaded.

• “NO  USB  DEVICE”:

Appears when no USB mass storage class device is 
connected.

• “CANNOT PLAY THIS DISC”:

Appears when unplayable disc is loaded.

• “CANNOT PLAY THIS DEVICE”:

Appears when unplayable USB mass storage class 
device is connected.

THP5-P3[B]-f.book  Page 13  Tuesday, December 27, 2005  3:39 PM