Sony UNIOFS7T1 Leaflet

Page of 2
IR Illuminator 
(Images 1)
Vandal Resistant 
Outdoor Recessed Dome
UNI-OFS7C1 & UNI-OFS7T1 
Security Camera Enclosures
•   
Designed for SNC-RZ30 and SNC-RZ50 model of PTZ cameras.
•   
Vandal resistant, heavy duty construction, rated to IK10 standards.
•   
Designed to be water and dust tight to IP66 standards.
•  
UL rated for drop ceiling applications.
•  
Easy camera installation and servicing from below the ceiling or overhang.  
•   
Includes a decorative trim ring with safety lanyard and captive security fasteners.
•   
Optically clear 0.118-inch (3mm) thick aspheric polycarbonate dome. 
•   
Thermostatically controlled 24VAC heater. 
•   
24VAC input with separate power inputs for heater, blower and camera power and regulated DC 12V 
with connector to cameras included.
•   
RoHS, WEEE, UL, CE compliant.
• 
  The outdoor dome camera housing shall be a Sony model UNI-OFS7C1, UNI-OFS7T1.  The housing shall be designed for the 
SNC-RZ30 and SNC-RZ50 model of PTZ cameras.  These models shall also be equipped with 24VAC input blowers and 
thermostatically controlled heaters.  The back box shall be constructed from heavy 10 - gauge aluminum and be capable 
of being installed in its entirety from below the ceiling.  The top will measure (H x D) 6.75 x 9.16 inches.  The lower dome shall 
be made of an injection molded, 3mm thick, optically clear thermoplastic polycarbonate (1 F-stop light reduction for tinted 
lower dome).  The lower dome shall be held in place with a die-cast aluminum trim ring (white powdercoat finish) that 
attaches with a minimum of three (3) security fasteners.  The UNI-OFS7C1 / UNI-OFS7T1 shall be designed to be installed in 
either sheetrock or hard ceiling surfaces.  Three rotating support arms will allow for adjustment to the ceiling material 
thickness.  The unit shall be fully sealed, designed to meet IP66 dirt/water ingress rating.  Unit will include thermostatically 
controlled 25-watt heater and blower unit.  The blower shall draw 1.4W continuous power.  The 25W heater shall turn on at 
50°F (10°C) and turn off at 77°F (25°C).  The housing shall support a temperature range of -20°F (-29°C) to 122°F (50°C).
• 
 Note: To achieve the increased depth with the aspheric design for optimal camera lens to capsule orientation, the capsule  
    is slightly angled around the highest section.  This creates a “line’, visible to the naked eye, around the upper most section of  
    the capsule.  This “line” serves as the geometric center line used to insure proper camera placement.  It is not typically seen  
    by the camera except with those models that have above the horizon tilt capability.
KEY FEATURES
BID SPECIFICATIONS
The UNI-OFS7C1 & UNI-OFS7T1 are 7-inch recessed 
dome enclosures that offer vandal resistance, 
versatility, easy installation and camera protection 
in a compact size.  These inconspicuous, recessed 
dome housings are specifically designed to 
accommodate the Sony SNC-RZ30 and SNC-RZ50 
PTZ cameras.