Eaton 9135 UPS PPDM EPPDMG6000-3U-5 User Manual
Product codes
EPPDMG6000-3U-5
INSTALLATION
EATON Two-in-One PPDM (5000/6000 VA) User's Guide
S
164201820 Rev 1 www.eaton.com/powerquality
31
11. Plug-receptacle PPDM models only. Plug the equipment to be
protected into the PPDM output receptacle(s).
NOTE DO NOT protect laser printers with the UPS because of the exceptionally high power
requirements of the heating elements.
requirements of the heating elements.
12. Switch the PPDM output circuit breaker to the ON (
|
) position.
NOTE The PPDM output circuit breaker (disconnect switch) disconnects power to the
output on the PPDM rear panel, but does NOT shut off power to the UPS (opening the
upstream protection would be required).
output on the PPDM rear panel, but does NOT shut off power to the UPS (opening the
upstream protection would be required).
13. Install the PPDM front cover (shipped separately).
14. To change the UPS default settings, refer to “Display Functions” in
the UPS user's guide.
Plug-Receptacle PPDM Rear Panels
This section shows the rear panels of the plug-receptacle PPDM
models.
models.