Sony UNIOSL7T2 Leaflet
IR Illuminator
(Images 1)
7-inch Vandal Resistant Rugged
Surface-Mount Housings
Surface-Mount Housings
UNI-OSL7C2 & UNI-OSL7T2
Security Camera Enclosures
•
7-inch vandal resistant rugged dome for easy installation and servicing from below ceiling.
•
Designed for Sony’s RH, RS, RX, EP/ER and ZR/ZP PTZ cameras.
•
The camera can be mounted on either side of the fixed camera bracket.
•
Includes a decorative trim ring with quick-release pressure springs.
•
Plenum rated metal top.
•
The product is available with a clear or tinted lower dome.
•
The vandal resistant outdoor surface mount enclosure shall be the Sony model UNI-OSL7C2, UNI-OSL7T2. The housing
top and trim ring shall be manufactured from durable cast aluminum. The dome shall be made of an injection molded,
optically clear thermoplastic polycarbonate and a sealing O-ring shall be included. The dome shall be held in place
with minimum of three (3) fasteners, and a safety cable shall be provided to hold the dome while servicing. Access to
the enclosure shall be from below with three (3) captive fasteners. A twist-off feature shall allow for the final removal of
the dome. Conduit openings for wiring are available on the bottom surface of the housing or by access to a removable
side cover. Mounting hardware is protected by removable covers that are secured with captive security fasteners. A tool
for the security fasteners shall be included.
optically clear thermoplastic polycarbonate and a sealing O-ring shall be included. The dome shall be held in place
with minimum of three (3) fasteners, and a safety cable shall be provided to hold the dome while servicing. Access to
the enclosure shall be from below with three (3) captive fasteners. A twist-off feature shall allow for the final removal of
the dome. Conduit openings for wiring are available on the bottom surface of the housing or by access to a removable
side cover. Mounting hardware is protected by removable covers that are secured with captive security fasteners. A tool
for the security fasteners shall be included.
The enclosure shall require 24VAC input power and be equipped with 12VDC input blowers and thermostatically
controlled heaters. The blower shall draw 1W continuous power. The 25W heater shall turn on at 60°F (15°C) and turn
off at 80°F (25°C). The housing shall support a temperature range of -20°F (-29°C) to 122°F (50°C). The enclosure shall
offer mounting support for the SNC-RH124, SNC-RS44/46, SNC-RX, SNC-ER/EP and the SNC-ZR/ZP series of PTZ cameras.
controlled heaters. The blower shall draw 1W continuous power. The 25W heater shall turn on at 60°F (15°C) and turn
off at 80°F (25°C). The housing shall support a temperature range of -20°F (-29°C) to 122°F (50°C). The enclosure shall
offer mounting support for the SNC-RH124, SNC-RS44/46, SNC-RX, SNC-ER/EP and the SNC-ZR/ZP series of PTZ cameras.
•
Note: To achieve the increased depth with the aspheric design for optimal camera lens to capsule orientation, the capsule is
slightly angled around the highest section. This creates a “line’, visible to the naked eye, around the upper most section of the
capsule. This “line” serves as the geometric center line used to insure proper camera placement. It is not typically seen by the
camera except on cameras with above the horizon tilt capability.
capsule. This “line” serves as the geometric center line used to insure proper camera placement. It is not typically seen by the
camera except on cameras with above the horizon tilt capability.
KEY FEATURES
BID SPECIFICATIONS
The surface-mount 7-inch vandal resistant rugged housing
offers versatility and camera protection in a compact size.
Unique in that these outdoor surface mount enclosures
can be mounted facing down or facing up toward the sky.
The enclosure offers mounting support for the SNC-RH124,
SNC-RS44/46, SNC-RX, SNC-ER/EP and SNC-ZR/ZP series of
PTZ cameras. For versatility, the enclosure is available with
a clear or tinted dome.
offers versatility and camera protection in a compact size.
Unique in that these outdoor surface mount enclosures
can be mounted facing down or facing up toward the sky.
The enclosure offers mounting support for the SNC-RH124,
SNC-RS44/46, SNC-RX, SNC-ER/EP and SNC-ZR/ZP series of
PTZ cameras. For versatility, the enclosure is available with
a clear or tinted dome.