Gefen 8x8 DVI Dual Link Matrix GEF-DVI-848DL Leaflet

Product codes
GEF-DVI-848DL
Page of 1
Matrix 8 DVI Sources
to Any 8 Dual Link Monitors
Gefen, LLC
20600 Nordhoff Street, Chatsworth CA 91311
Tel. (818) 772-9100   (800) 545-6900   Fax (818) 772-9120
www.gefenpro.com
GEF-DVI-848DL
Overview
This product simplifies the process of routing up to eight DVI sources 
to any of eight DVI monitors without losing quality or resolution. The 
GefenPRO 8x8 DVI Dual Link Matrix provides a simple, reliable, and 
highly effective method of streamlining any installation using multiple 
sources and outputs, taking the hassle out of managing multiple 
connections. Each DVI source is accessible from any monitor by 
using the front-panel buttons, IR remote unit, built-in RS-232 or using 
IP control.
How It Works
The GefenPRO 8x8 DVI Dual Link Matrix has eight DVI inputs and 
eight DVI outputs. Using the supplied DVI cables, connect eight 
sources to the DVI input ports on the GefenPRO 8x8 DVI Dual Link 
Matrix's input side. Connect the GefenPRO 8x8 DVI Dual Link 
Matrix's eight DVI outputs to the monitors. Plug in the power cord and 
power ON the GefenPRO 8x8 DVI Dual Link Matrix. The connected 
monitors will show video according to the routing selection. 
Note: 
The GefenPRO 8x8 DVI Dual Link Matrix only supports DVI-D. The 
DVI connectors on the GefenPRO 8x8 DVI Dual Link Matrix have all 
29 pins.
Features:
•  Increases productivity
•  Supports resolutions up to 1920x1200 (Single Link) and 
    3840x2400 (Dual Link)
•  Front panel control buttons for local switching
•  IP Control
•  Serial RS-232 Interface for remote control via a computer or 
    control automation devices
•  Discrete IR Remote Control
•  Advanced EDID management permits uploading of custom 
    internal or external EDID settings
•  Supports DDWG standards for DVI
•  Built-in power supply
•  Output masking command
•  Standby mode
•  Grounding pin
•  IR Sensor
•  IR Extender
•  Status LCD (shows routing status)
•  Firmware upgrade via RS232
•  Rack mountable
Specifications*:
•  Video Amplifier Bandwidth: 2 x 165 MHz (per channel)
•  DVI Connector: DVI-I 29 Pin Female (digital only)
•  RS-232 connector: DB-9 Female
•  IR Extender: 3.5mm Mini-Stereo
•  IP Control Connector: RJ-45
•  Input Video Signal: 1.2 Volts p-p
•  Operating Temperature: 0 - 40 °C degrees
•  Power Supply: AC 110/220V (Internal), IEC connector
•  Power Consumption: 90 Watts (max)
•  Dimensions: 17.25" W x 3.5" H x 12" D
•  Shipping Weight: 21 lbs
*S
pecifications subject to change without notice.
All trademarks are the properties of their respective owner
s
.