Kramer Electronics VM-114H4C Leaflet
VM-114H4C
2x1:4 HDMI Twisted Pair Transmitter & Distribution Amplifier
The VM
−
114H4C is a high
−
performance
switcher and distribution amplifier for HDMI
and DGKat™ twisted pair signals. It reclocks
and equalizes one of two selectable input
signals (HDMI or DGKat twisted pair) and
distributes it to four DGKat twisted pair
outputs.
and DGKat™ twisted pair signals. It reclocks
and equalizes one of two selectable input
signals (HDMI or DGKat twisted pair) and
distributes it to four DGKat twisted pair
outputs.
Max. Data Rate
- 1.65Gbps bandwidth per graphic channel.
HDTV Compatible.
HDCP Compliant.
DGKat™ Signal Integration
- Kramer’s unique technology for converting TMDS as well as control and communication
to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat™ cables designed
specifically for optimum performance.
specifically for optimum performance.
Inputs
- 1 HDMI & 1 DGKat twisted pair on an RJ
−
45 connector.
Outputs
- 4 DGKat twisted pairs on RJ
−
45 connectors.
I-EDIDPro™ Kramer Intelligent EDID Processing™
- Intelligent EDID handling & processing algorithm ensures Plug
and Play operation for HDMI systems.
HDMI Support
- HDMI (V.1.4 with x.v.Color™, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS
−
HD (only on
the TP inputs and outputs)).
3D Pass-Through.
Kramer Equalization & re-Klocking™ Technology
- Rebuilds the digital signal to travel longer distances.
System Range
- Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC
−
DGKat524 cable. Up to
90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC
−
DGKat623 cable. Up to 100m (330ft) at 1080i or
up to 90m (295ft) at 1080p on shielded BC
−
DGKat7a23 cable.
Cable
- Requires STP (shielded twisted pair) cable. For optimum range and performance, use Kramer's
BC
−
DGKat524, BC
−
DGKat623 or BC
−
DGKat7a23 cables. Note that the transmission range depends on the signal
resolution, source device and display used. The distance using non
−
Kramer CAT 5, CAT 6, and CAT 7 cables may
not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground.
Active Input & Output LED Indicators.
Power Connect™ System
- A single connection to the transmitter or the receiver powers both units when the devices
are within 90m (270ft) of each other.
Flexible Control Options
- Front panel buttons, RS
−
232, infrared control sensor, remote included.
FEATURES