ADDER CATx DisplayPort CAM CATX-MDP-USBA Leaflet

Solutions

Experts in 

Connectivity  

Solutions

Computer Access Module

Take advantage of the latest digital video 

devices with CATX-DP and  CATX-MDP modules

FEATURES

Resolutions and cable lengths

The maximum resolutions achievable are: 

1920 x 1200 x 60Hz at 200m 

1280 x 1024 x 60Hz at 300m. 

Power

The CATX DisplayPort CAM uses the 

USB port to derive its power from the 

host computer, dispensing with the need 

for a separate power supply and thus 

simplifying installation. Therefore the USB 

cable must always be connected to a USB 

port on the computer that is capable 

of providing up to 500mA. Power is not 

taken from the DisplayPort connector

Mini DisplayPort version available

Some computers, servers and graphics 

cards (Apple Mac Pro and ATI Radion 

graphics cards) come with mini 

DisplayPort connectors as these are 

smaller than the standard connector. A 

version of the CAM is available with Mini 

DisplayPort connectors.

EDID display information

The module will check during power 

up the EDID information available from 

the KVM switch or extender that is 

connected to the monitor and passes this 

back to the computer.

USB

The CAM supports low speed (1Mb/s) 

HID USB devices only.

Audio

2 channel CD Quality audio is 

supported via a 3.5mm jack plug. Audio 

is not available through the display port 

connector.

PRODUCT IN BRIEF

The CATX Display port Computer 
Access Modules are highly compact 
devices that allow you to extend your 
DisplayPort equipped computer over 
CATX cable up to 300 meters.

TheCAM connects to the DisplayPort 
video connector plus USB and Audio 
ports on your computer and then 
connects via CAT 5, 5e or 6 cabling to 
the AdderView CATx KVM switches 
and/or Adder extender receivers 
(either AdderLink X2 Silver or X200), 
each of which can be located up to 300 

meters from the module. Your video 
display, keyboard, mice and speakers 
arethen all linked to the remote device.

CATx DisplayPort CAM