LogiLink POE202 Leaflet
Best Connectivit
y
www.LogiLink.
com
* The specifications and pictures are subject to change without notice.
*All trade names referenced are the registered namework of their respective owners.
POE202 is 1 LAN-in (data + power) port and 1 LAN-out (data only) port Power over Ethernet
Splitter that is designed to support Ethernet devices such as Access Points or IP cameras. It can
provide four different types of DC power over existing Cat-5 cable to a device with an Ethernet
port and solve the limit of the outlet location. It is a superb choice to boost your network with
better performance and efficiency.
Splitter that is designed to support Ethernet devices such as Access Points or IP cameras. It can
provide four different types of DC power over existing Cat-5 cable to a device with an Ethernet
port and solve the limit of the outlet location. It is a superb choice to boost your network with
better performance and efficiency.
No Special Networking Cable Required
By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both
power and data where power source is difficult to obtain. It helps you reduce the time of
installation and cost.
By adding PoE devices, you can use an existing standard Cat-5 Ethernet cable to deliver both
power and data where power source is difficult to obtain. It helps you reduce the time of
installation and cost.
Features:
• 1 LAN-In Port (Data + Power) + 1 LAN-Out Port (Data Only)
• Power Detection and Classification
• Compatible with IEEE 802.3at
• Suppors 5V, 7.5V, 9V and 12V output voltage
• 1 LAN-In Port (Data + Power) + 1 LAN-Out Port (Data Only)
• Power Detection and Classification
• Compatible with IEEE 802.3at
• Suppors 5V, 7.5V, 9V and 12V output voltage
Art No. POE202
- 1 -
Power PoE Splitter
(Compatible IEEE 802.3af)