Kingston Technology 1GB 800MHz DDR2 ECC CL5 DIMM (Kit of 2) KVR800D2E5K2/1G Data Sheet
Product codes
KVR800D2E5K2/1G
Memory Module Specification
DESCRIPTION:
ValueRAM's KVR800D2E5K2/1G is a kit of two 64M x 72-bit (512MB) DDR2-800 CL5
SDRAM (Synchronous DRAM) ECC memory modules. Total kit capacity is 1GB (1024MB).
The components on each module include nine 64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-800
SDRAM in FBGA packages. Each 240-pin DIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are as follows:
SDRAM (Synchronous DRAM) ECC memory modules. Total kit capacity is 1GB (1024MB).
The components on each module include nine 64M x 8-bit (16M x 8-bit x 4 Bank) DDR2-800
SDRAM in FBGA packages. Each 240-pin DIMM uses gold contact fingers and requires
+1.8V. The electrical and mechanical specifications are as follows:
FEATURES:
Clock Cycle Time (tCK) CL=5
2.5ns (min.) / 8ns (max.)
Row Cycle Time (t
RC
)
60ns (min.)
Refresh to Active/Refresh Command Time (tRFC)
105ns
Row Active Time (tRAS)
38ns (min.) / 70,000ns (max.)
Single Power Supply of
+1.8V (+/- .1V)
Power
2.025 W (operating Per Module)
UL Rating
94 V - 0
Document No. VALUERAM0495-001.A00
06/26/06
Figure 1: KVR800D2E5K2/1G 240-Pin DIMM
KVR800D2E5K2/1G
1GB (512MB 64M x 72-Bit x 2 pcs.)
DDR2-800 CL5 ECC 240-Pin DIMM Kit
Note: The module defined in this data sheet is one of several configurations available under this part number. While
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
all configurations are compatible, the DRAM combination and/or the module height may vary from what is described
here. However, in no configuration will the module height exceed 1.250" (31.75mm).
Units : Millimeters
A
B
63.00
55.00
30.00
133.35
1.27 ± 0.10
2.70