Fujitsu TX100 S3P VFY:T1003SC070IN User Manual

Product codes

VFY:T1003SC070IN

System configurator and order-information guide

Start PRIMERGY TX100 S3p

PRIMERGY TX100 S3p Status 2012-04-30

Section

Basic unit

System unit consisting of:

* Housing including standard power supply (no redundancy)

* Imprint of MAC Adress on system label and delivery note as standard

* heat sink for CPU

Systemboard with:

* 4 PCI expansion slots:

1x PCIe x1, mechanically x4, notched

(possible to plug x16 cards)

1x PCIe x4,

notched; fits for lp (low profile) and fh (full high) formfactor cards

2x PCIe x8

all slots are PCIe 2.0 slots; PCIe 1.0 cards are fully supported as well

* Slot for optional TPM module

* 4 memory slots for up to

32GB

(1066MHz PC3 8500 / 1333MHz PC3 10600) unbuffered DDR III RAM (ECC)

max.

8GB

modul per slot

* 2 bays 5.25" for accessible drives

* 4 LFF (3.5" Large Form Factor) bays 1" high for no hot plug SATA HD
* SATA controller with up to 4 HDD's using Intel

220 (Chipset)

* ATI ES1000 64MB

1600 x 1200 pixel with 16 bit colours and 75 Hz
1280 x 1024 pixel with 16/32 bit colours and 120/75 Hz
1152 x 864 pixel with 16/32 bit colours and 160/100Hz
1024 x 768 pixel with 16/32 bit colours and 200/120Hz
800 x 600 and 640 x 480 pixel with 32 bit colours and 200Hz

* Intel 10/100/1000 Mb/s ("Lewisville"

82579LM

) on-board LAN

* Intel 10/100/1000 Mb/s ("Hartwell"

82574L

) on-board LAN supporting

WoL, PXE and iSCSI boot

Cables included in Base Unit:

1. SATA cabel for CD/DVD
2.

4 x SATA cabel

in basic unit (depends on base unit)

ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates

External Interfaces:

1x RS-232-C (serial, 9 pins)

1x VGA (15 pins)

10x USB 2.0 ( 2x frontside, 4x rearside, 2x internal for backup devices, 1x internal USB Stick, 1x internal USSD / UFM)

1x LAN RJ45

Fujitsu Technology Solutions x86 PRIMERGY Server

6 of 13