NEC 1TB 3.5" 7200 rpm SATA II N8150-282 User Manual
Product codes
N8150-282
CONFIGURATION GUIDE
–
NEC EXPRESS5800/R110d-1E
NEC Corporation
Revision 2.2, January 2011
13
4.2
Internal Drive Configuration
4.2.1
3.5-inch Drive with On-board SATA Controller
Category
Product Name / Description
Part Number
Storage Controller
On-board SATA Controller
4 x SATA ports, RAID 0/1 capable
(Standard)
Cable
Internal SATA Cable
1x SATA to 1x SATA, 4 sets
(Standard)
HDD Cage
3.5-inch HDD Cage
4 x 3.5-inch hot plug hard drive bays
(Standard)
HDD
4 slots available
160GB HDD
1 x 160 GB, 3.5-inch, SATA2, 7,200 rpm
N8150-285
250GB HDD
1 x 250 GB, 3.5-inch, SATA2, 7,200 rpm
N8150-279
500GB HDD
1 x 500 GB, 3.5-inch, SATA2, 7,200 rpm
N8150-280
1TB HDD
1 x 1 TB, 3.5-inch, SATA2, 7,200 rpm
N8150-282
2TB HDD
1 x 2 TB, 3.5-inch, SATA2, 7,200 rpm
N8150-283
3TB HDD
1 x 3 TB, 3.5-inch, SATA2, 7,200 rpm
N8150-336
NOTE:
On-board SATA RAID controller is supported only on Windows operating systems. An optional RAID
controller is required to configure RAID array for other operating systems.
controller is required to configure RAID array for other operating systems.
On-board SATA RAID Controller does not support RAID 10 configured with 2TB and 3TB HDDs.
Hot plug insertion/removal is not supported with the on-board SATA non-RAID controller.
3 TB HDDs are not supported with the on-board SATA non-RAID controller.
All hard drives within a RAID array should be of the same capacity.