Samsung 320MX-3 LH32HBPLBCEN User Manual
Product codes
LH32HBPLBCEN
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
OSD menu or return to the previous menu.
Navigate buttons (Up-Down buttons)
Moves from one menu item to another vertically or adjusts selected menu
values.
values.
Adjust buttons (Left-Right buttons) / Volume buttons
Moves from one menu item to another horizontally or adjusts selected
menu values. When OSD is not on the screen, press the button to adjust
volume.
menu values. When OSD is not on the screen, press the button to adjust
volume.
ENTER button [ENTER]
Activates a highlighted menu item.
SOURCE button [SOURCE]
Switches from PC mode to Video mode. Selects the input source that an
external device is connected to.
external device is connected to.
[PC] → [DVI] → [AV] → [Component] → [HDMI1] → [HDMI2] → [Dis-
playPort] → [MagicInfo] → [TV]
playPort] → [MagicInfo] → [TV]
Note
•
The [RGB/COMPONENT IN] port is compatible with RGB (PC) and
Component signals.
Component signals.
However, the picture may display abnormally if the connected external
input signal is different from the selected video signal.
input signal is different from the selected video signal.
•
A TV tuner box (sold separately) must be connected to use the TV.
Note
Using MagicInfo
•
To use MagicInfo with an MXN-3
, MPN-3 model, connect the MagicInfo output
on the already included network box to [HDMI IN 2 (MAGICINFO)] on
the product.
the product.
•
To use MagicInfo with an MX-3
, MP-3 model, install inside the product a net-
work box specified by Samsung and connect the MagicInfo output on
the network box to[HDMI IN 2 (MAGICINFO)] on the product.
the network box to[HDMI IN 2 (MAGICINFO)] on the product.
D.MENU button
Opens the on-screen D.MENU.
Note
The D.MENU button is activated when a TV tuner is connected and oth-
erwise, the PIP button is enabled.
erwise, the PIP button is enabled.
PIP button
Push the PIP button to turn the PIP screen On / Off.
Power button [
]
Use this button for turning the LCD Display on and off.
Introduction
(US Only)