Micromega Aria MM ARIA BLACK User Manual

Product codes
MM ARIA BLACK
Page of 8
 
 
 
- 2 - 
Dear Customer, 
Thank you for purchasing ARIA.  
This unit provides ease of use and sonics of the highest quality. Please pay close attention to this instruction manual, and 
read it fully before attempting to operate. It is designed to ensure that you maximise your pleasure of ARIA and familiarise 
you with its many unique functions. 
 
 
CHECKING 
Check that the carton has no damage. Should you have any doubt 
about its condition, please do not hesitate to contact your dealer. 
UNPACKING 
Very carefully remove the unit from the box, taking care to 
preserve all the packing material. It is good practice to put the 
carton and its contents into an outer plastic bag and deposit it 
somewhere safe and dry. In the unlikely event that your unit 
needs to be sent back to either your dealer or distributor, it must 
be sent in the original packing material. Failure to observe this will 
invalidate your warranty. 
ACCESSORIES 
 
Upon opening the carton you should find the following:  
•  Mains Lead. 
•  Stereo Cinch cable 
•  Remote control Handset and 2x AAA batteries. 
 
MAINS VOLTAGE 
 
Check that the mains voltage indicated on both the carton and the 
bottom of the unit correspond to the local power supply  
If you are in any doubt, consult your dealer. 
INSTALLATION 
 
In order to obtain the maximum performance of ARIA, it is 
important to follow the installation instructions. 
Wherever possible, we recommend that ARIA is installed in an 
audio rack or other suitable furniture that provides sufficient 
ventilation. 
 
CONNECTIONS 
 
Having verified that the ON/OFF switch is on OFF position, 
connect the mains leads provided to the rear of the unit and to the 
wall socket. 
Connect the interconnect cable from the rear of ARIA to your 
amplifier input. Connect the Digital out if required. 
 
 
COVER CLEANING 
 
To clean up the lid, use a soft rag, out of cotton preferably and 
window cleaner. 
We advise you to not use any products containing silicone and to 
avoid the use of solvents. This could lead to damage irremediably 
the shiny and transparent aspect of the cover. 
In any case, please manipulate the cover with caution. 
When the device is not used, check that the cover is left close.