Intel G640T CM8062301002204 User Manual
Product codes
CM8062301002204
Processor Configuration Registers
104
Datasheet, Volume 2
2.6.25
PM_CAPID1—Power Management Capabilities Register
B/D/F/Type:
0/1/0–2/PCI
Address Offset:
80–83h
Reset Value:
C803_9001h
Access:
RO, RO-V
Size:
32 bits
Bit
Attr
Reset
Value
RST/
PWR
Description
31:27
RO
19h
Uncore
PME Support (PMES)
This field indicates the power states in which this device may
This field indicates the power states in which this device may
indicate PME wake using PCI Express messaging. D0, D3hot &
D3cold. This device is not required to do anything to support D3hot
& D3cold; it simply must report that those states are supported.
Refer to the PCI Power Management 1.1 Specification for encoding
explanation and other power management details.
26
RO
0b
Uncore
D2 Power State Support (D2PSS)
Hardwired to 0 to indicate that the D2 power management state is
Hardwired to 0 to indicate that the D2 power management state is
NOT supported.
25
RO
0b
Uncore
D1 Power State Support (D1PSS)
Hardwired to 0 to indicate that the D1 power management state is
Hardwired to 0 to indicate that the D1 power management state is
NOT supported.
24:22
RO
000b
Uncore
Auxiliary Current (AUXC)
Hardwired to 0 to indicate that there are no 3.3Vaux auxiliary
Hardwired to 0 to indicate that there are no 3.3Vaux auxiliary
current requirements.
21
RO
0b
Uncore
Device Specific Initialization (DSI)
Hardwired to 0 to indicate that special initialization of this device is
Hardwired to 0 to indicate that special initialization of this device is
NOT required before generic class device driver is to use it.
20
RO
0b
Uncore
Auxiliary Power Source (APS)
Hardwired to 0.
Hardwired to 0.
19
RO
0b
Uncore
PME Clock (PMECLK)
Hardwired to 0 to indicate this device does NOT support PME#
Hardwired to 0 to indicate this device does NOT support PME#
generation.
18:16
RO
011b
Uncore
PCI PM CAP Version (PCIPMCV)
Version - A value of 011b indicates that this function complies with
Version - A value of 011b indicates that this function complies with
revision 1.2 of the PCI Power Management Interface Specification.
15:8
RO-V
90h
Uncore
Pointer to Next Capability (PNC)
This contains a pointer to the next item in the capabilities list. If
This contains a pointer to the next item in the capabilities list. If
MSICH (CAPL[0] @ 7Fh) is 0, then the next item in the capabilities
list is the Message Signaled Interrupts (MSI) capability at 90h. If
MSICH (CAPL[0] @ 7Fh) is 1, then the next item in the capabilities
list is the PCI Express capability at A0h.
7:0
RO
01h
Uncore
Capability ID (CID)
Value of 01h identifies this linked list item (capability structure) as
Value of 01h identifies this linked list item (capability structure) as
being for PCI Power Management registers.