Intel G640T CM8062301002204 User Manual

290

Datasheet, Volume 2

This register specifies the invalidation event interrupt control bits. This register is 
treated as RsvdZ by implementations reporting Queued Invalidation (QI) as not 
supported in the Extended Capability register.

31

RW-L

1b

Uncore

Interrupt Mask (IM)
0 = No masking of interrupt. When an invalidation event condition 

is detected, hardware issues an interrupt message (using the 

Invalidation Event Data & Invalidation Event Address register 

values).

1 = This is the value on reset. Software may mask interrupt 

message generation by setting this field. Hardware is 

prohibited from sending the interrupt message when this field 

is Set. 

30

RO-V

0b

Uncore

Interrupt Pending (IP)
Hardware sets the IP field whenever it detects an interrupt 

condition. Interrupt condition is defined as:

• An Invalidation Wait Descriptor with Interrupt Flag (IF) field 

Set completed, setting the IWC field in the Invalidation 

Completion Status register.

• If the IWC field in the Invalidation Completion Status register 

was already Set at the time of setting this field, it is not 

treated as a new interrupt condition.

The IP field is kept set by hardware while the interrupt message is 

held pending. The interrupt message could be held pending due to 

interrupt mask (IM field) being set, or due to other transient 

hardware conditions. The IP field is cleared by hardware as soon as 

the interrupt message pending condition is serviced. This could be 

due to either:

• Hardware issuing the interrupt message due to either change 

in the transient hardware condition that caused interrupt 

message to be held pending or due to software clearing the IM 

field.

• Software servicing the IWC field in the Invalidation Completion 

Status register. 

29:0

RO

0h