Draper Cinefold 218070 User Manual

See previous page for full description of this product .

Draper offers the following seven projection screens for use with the TorkStar system: Targa, Premier, Paragon, Signature®/Series V, Cineperm, 
Truss Cineperm, and Onyx. The appropriate mounting kit below is REQUIRED when using a projection screen with the TorkStar system .

For use with screens with a case length 

of 220” or less:

Targa / Premier (Small Case) Direct Cable Kit

503115

$209

3

Targa / Premier (Large Case) Direct Cable Kit

1

503117

209

7

Signature®/Series V (Large Case) Direct Cable Kit

503121

209

5

Paragon Direct Cable Kit

503123

209

6

Onyx Direct Cable Kit

2

503125

209

4

Cineperm Direct Cable Kit

503127

209

4

Truss Cineperm Direct Cable Kit

503129

209

5

For use with any screen size . 

Required for screens (except the Truss Cineperm) with a case length over 220” .  When a Projection Screen Batten is required it MUST be 
supplied by Draper (see Projection Screen Batten pricing and requirements below) .

Targa / Premier (Small Case) Cable Batten Mounting Kit

503114

$250

12

Targa / Premier (Large Case) Cable Batten Mouting Kit

1

503116

250

14

Signature®/Series V (Large Case) Cable Batten Mounting Kit

503120

250

14

Paragon Cable Batten Mounting Kit

503122

250

17

Onyx Cable Batten Mounting Kit

2

503124

250

12

Cineperm Cable Batten Mounting Kit

503126

250

13

Truss Cineperm Cable Batten Mounting Kit

503128

250

12

Projection Screen Batten—2 .5” O .D . x 13 gauge steel tube . Must be 24" 

longer than projection screen case or frame . Battens longer than 20' will 

be provided in two equal sections and require a Splice Kit .

3

C073 .122

4 .85/ft

varies

Projection Screen Batten Splice Kit—36" x 2 .25" O .D . 14 gauge steel tube, 

factory predrilled to receive four screws and four lock nuts (included) . 

503134

114

7

1

 Use of Large Case Targa and Large Case Premier screens with TorkStar requires specially modified 

cases . DO NOT use TorkStar with standard versions of these screens . 

2

 Use of Onyx screens with TorkStar requires the Onyx Corner Reinforcement Kit (Part No . 253696) . 

3

 Projection Screen Batten MUST be supplied by Draper and MUST be 24" longer than screen case or 

frame . If over 20' (240") long, a Projection Screen Batten Splice Kit is required (see price above) . If a 
Splice Kit is required, the two equal sections of Projection Screen Batten will be factory pre-drilled 
to receive the Splice Kit in the field . Completed splice must be located at the center point of the 
Projection Screen Batten ." 

All motorized screens with case lengths over 220” MUST USE ALL of the following:

1 . A Projection Screen Batten (MUST be supplied by Draper)—2 .5” O .D . by minimum of 13 gauge steel tube .
2 . The specific projection screen Cable Batten Kit
3 . The Projection Screen Batten Splice Kit
4 . A minimum of two (2) PosiSpools if using a TS1000 Motor Winch or a minimum of three (3) 

PosiSpools if using a TS1400 Motor . 

All Truss Cineperms over 220” wide MUST USE the following:

1 . A Truss Cineperm Direct Cable Kit or Truss Cineperm Cable Batten Kit .
2 . If using a Cable Batten Kit, the Projection Screen Batten is required and MUST be supplied by 

Draper . It MUST be 24" longer than Truss Cineperm frame .

3 . If using the Cable Batten Kit, the Projection Screen Batten Splice Kit MUST also be used .
4 . A minimum of two (2) PosiSpools if using the TS1000 Motor Winch or a minimum of three (3) PosiSpools if using the TS1400 Motor .

Grid Well  Mounting  

Configuration

Loft Beam Mounting  

Configuration