Altronix EBRIDGE1CRT Leaflet
The eBridge1CT and eBridge1CR are CAT5 to Coax cable Ethernet adapters. The
paired set enables fast 10/100Base-T Ethernet digital communication to be transmit-
ted over coax cable. These plug and play units facilitate system upgrades
from analog to IP cameras/devices utilizing existing legacy Coax
and eliminating the costs and labor associated with installing new
network cabling. In addition data transmission over the Coax can
be extended to 1500’ (five times the 100m/328ft Ethernet maximum
and eliminating the costs and labor associated with installing new
network cabling. In addition data transmission over the Coax can
be extended to 1500’ (five times the 100m/328ft Ethernet maximum
length), eliminating the need for repeaters. At the
same time the units can combine Composite Video
Signal with the Ethernet data enabling connection
to an analog input on a monitor or matrix switch.
same time the units can combine Composite Video
Signal with the Ethernet data enabling connection
to an analog input on a monitor or matrix switch.
Input:
• 12VDC to 24VDC Class 2 power supply (polarity not
observed) or 12VAC to 24VAC Class 2 plug-in
transformer.
observed) or 12VAC to 24VAC Class 2 plug-in
transformer.
Power Consumption:
• eBridge1CR/eBridge1CT:
12VDC/175mA, 24VDC/90mA,
12VAC/325mA, 24VAC/175mA.
12VDC/175mA, 24VDC/90mA,
12VAC/325mA, 24VAC/175mA.
Ethernet:
• Connectivity: RJ45, auto-crossover.
• Wire type: 4-pair Cat-5 or better structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• Throughput is rated to pass 25mbps of data at
distances up to 1500 ft. With proper headend
equipment, multiple Megapixel cameras can be used.
• Wire type: 4-pair Cat-5 or better structured cable.
• Distance: up to 328 ft. (100m).
• Speed: 10/100BaseT, half/full duplex, auto negotiation.
• Throughput is rated to pass 25mbps of data at
distances up to 1500 ft. With proper headend
equipment, multiple Megapixel cameras can be used.
Coax:
• Distance: up to 1,500 ft.
• Connectivity: BNC, RG-59/U or similar.
• Connectivity: BNC, RG-59/U or similar.
LED Indicators:
• Blue LED - Coax link connection.
• Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• Green LED - Power.
• Yellow and Green LED (RJ45) IP Link status,
10/100Base-T/active.
• Green LED - Power.
Environmental:
• Operating Temperature:
14ºF to 122ºF (--- 10ºC to +50ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing.
14ºF to 122ºF (--- 10ºC to +50ºC).
• Storage Temperature:
-- 22º to 158ºF (--- 30º to +70ºC) Storage.
• Humidity: 20 to 85%, non-condensing.
Accessories:
• Composite video cables (included) - enables
simultaneous composite video signal over the
same Coax.
• Two (2) power connectors.
simultaneous composite video signal over the
same Coax.
• Two (2) power connectors.
Applications:
• Retrofit digital IP cameras in an analog CCTV
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enables simultaneous transmission of composite and
digital IP video.
installation.
• Works with Megapixel, HD720, HD1080 and VGA
(SD) cameras.
• Extend Network link distance in an industrial
environment.
• Upgrade deployed CCTV Coax to a digital network
for Retail, Casinos, Airports, Schools, Hospitals, etc.
• Enables simultaneous transmission of composite and
digital IP video.
Mechanical:
• Lightweight molded fiberglass reinforced polyester
enclosure is corrosion resistant and does not contain
halogens.
• Dimensions (W x L x H approx.):
2.5” (63.5mm) x 3.8” (96.52mm) x 1” (25.4mm)
• Product weight (approx.): 4 oz. (0.11 kg.)
• Shipping weight (approx.): 7 oz. (0.17 kg.)
enclosure is corrosion resistant and does not contain
halogens.
• Dimensions (W x L x H approx.):
2.5” (63.5mm) x 3.8” (96.52mm) x 1” (25.4mm)
• Product weight (approx.): 4 oz. (0.11 kg.)
• Shipping weight (approx.): 7 oz. (0.17 kg.)
Units available individually:
•
eBridge1CR: Ethernet receiver enables IP video/data
over Coax. Operates with compatible
cameras/devices or eBridge1CT.
•
cameras/devices or eBridge1CT.
•
eBridge1CT: Ethernet transceiver enables IP video/
data over Coax. Operates with eBridge1CR.
eBridge1CRT -
IP over Coax Kit
Rev. DSeBridge1CRT_02292012
Specifications
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
eBridge1CT
eBridge1CR
Overview