Altronix 6062 Leaflet

• Model 6062 programmable timer is suitable for many functions that require 

a timed operation e.g. Access Control Applications, Siren/Bell Cut Off 
Module, Dialer Delay, Guard Tour Supervisory Timer, etc. Some optional 
functions include: One Shot, Delayed Release, Delayed Operate, Delayed 
Pulse and Pulser/Flasher. 

• Quick and extremely accurate time range adjustment 

from 1 sec. to 60 min. 

• LED indicates relay is energized. 
• Triggers via positive DC (+) voltage, dry contact 

closure, or removal of contact closure. 

• Selectable relay activation at the start or end of the 

timing cycle.

• One (1) second momentary relay activation at the end 

of the timing cycle (eliminates the need to use two (2) 
timers for this function).

• Built-in reset feature which cancels timing cycle.
• Repeat (pulser/flasher) mode.
• Snap Trac compatible (order Altronix model #ST3)
• DIN Rail Mount version available 

(order Altronix model # DTMR1).

Board dimensions (approximate): 3"L x 2.5"W x .75"H  

Rev. DS6062_DTMR1- A04F

• 12VDC or 24VDC operation is selectable. 
• Form "C" relay contacts are 8 amp at 120VAC/28VDC.
• Current Draw: Stand-by 3mA, Relay Energized 40mA.

3.4375

2.75

2.6875

.875

.125

.3125

3.25

.625