Altronix AL600ULPD8 Leaflet

AL600ULPD8 is a multi-output power supply/charger which converts a 115VAC, 
60Hz input into eight (8) 12VDC or 24VDC   non-power limited outputs.

Rev. DSAL600ULPD8_04172012

AL600ULPD8

•  Input 115VAC, 60Hz, 1.9 amp.

•  12VDC or 24VDC selectable output.
• 6 amp continuous supply current.
•  Eight (8) fuse protected outputs.
•  Output fuses are rated @ 3.5 amp/250VAC.
•  Filtered and electronically regulated output.
•  Short circuit and thermal overload protection.

•  Built-in charger for sealed lead acid or
  gel type batteries.
•  Automatic switch over to stand-by battery
 when AC fails.
•  Maximum charge current 0.7 amp.

•  AC fail supervision (form “C” contacts).
•  Low battery supervision (form “C” contacts).
•  Battery presence supervision (form “C” contacts).

•  AC input and DC output LED indicators.

•  Operating temperature: 0º C to 49º C ambient.
•  27-55 BTU/Hr.
•  System AC input VA requirement: 218.5VA.

•  Enclosure Dimensions (H x W x D approx.):
  13.5” (342.9mm) x 13” (330.2mm) x 3.25” (82.55mm)
  -  Accommodates two (2) 12VDC/7AH batteries.
•  Product weight (approx.): 7.4 lbs. (3.36 kg.).
•  Shipping weight (approx.): 8.4 lbs. (3.81 kg.).

UL 294

UL Listed for Access Control

 

System Units.

UL 1481  UL Listed Standard for Safety for

Fire Protective Signaling Systems.

CUL Listed - CSA Standard C22.2 
No.205-M1983, Signal Equipment.