Altronix AL300ULXB Leaflet
• 12VDC or 24VDC selectable output.
• 2.5 amp supply current.
• Single Class 2 Rated power limited output.
• Input 115VAC / 60Hz, 1.45 amp.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
• 2.5 amp supply current.
• Single Class 2 Rated power limited output.
• Input 115VAC / 60Hz, 1.45 amp.
• Filtered and electronically regulated output.
• Short circuit and thermal overload protection.
• Built-in charger for sealed lead acid
or gel type batteries.
• Maximum charge current rated @ .7 amp.
• Automatic switch over to stand-by battery when
• Automatic switch over to stand-by battery when
AC fails (zero voltage drop).
• AC fail supervision (form "C" contacts).
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
• Low battery supervision (form "C" contacts).
• Battery presence supervision (form “C” contacts).
• AC input and DC output LED indicators.
AL300ULXB Off-line Switching Power
Supply/Charger
Supply/Charger
Rev. DSAL300ULXB - C25H
Overview
Specifications
This power supply/charger converts a 115VAC / 60Hz input into a single
Class 2 Rated 12VDC or 24VDC power limited output.
Class 2 Rated 12VDC or 24VDC power limited output.
4.6”W x 7.5”L x 2.7”H
Board Dimensions (approximate):
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
0.36”
Ø0.156”
0.28”
3.7”
6.7”
4.5”
3.7”
Agency Approvals
UL Recognized component for Access Control
System Units (UL 294), Standard for Power
Supplies for Use with Burglar-Alarm Systems
(UL 603),
System Units (UL 294), Standard for Power
Supplies for Use with Burglar-Alarm Systems
(UL 603),
Hospital Signaling and Nurse Call Equipment
(UL 1069), Standard for Safety for Fire Protective
Signaling Systems (UL 1481).
(UL 1069), Standard for Safety for Fire Protective
Signaling Systems (UL 1481).