Philips DVP1013 DVD player DVP1013/F7 User Manual

Product codes
DVP1013/F7
Page of 42
E
ng
li
sh
31
DVD Menu Options 
(continued)
TIPS: 
The underlined option is the factory default setting.
 Press 
W to go back to previous menu item. Press SETUP to exit the menu item.
 Digital 
Output
Set the Digital Output according to your 
optional audio equipment connection.
 { 
All }
Select this if the connected device has a 
built-in multichannel decoder that 
supports one of the multichannel audio 
format (Dolby Digital, MPEG-2).
 { 
PCM Only }
Select this if the connected device is not 
capable of decoding multichannel audio. 
The DVD player will convert the Dolby 
Digital and MPEG-2 multichannel signals 
to PCM (Pulse Code Modulation).
 { 
SPDIF Off }
To deactivate the digital audio output. 
For example, if you use the AUDIO OUT 
sockets to connect to a TV or stereo 
system.
 LPCM 
Output
If you connect the DVD player to a PCM 
compatible receiver via the digital 
terminals, such as coaxial or optical etc, 
you may need to adjust ‘LPCM Output’.
 { 
48K }
Playback a disc recorded at the sampling 
rate of 48kHz.
 
96K }
Playback a disc recorded at the sampling 
rate of 96kHz. This rate can only be 
achieved in Stereo-Classic (Flat) mode.
Tip:
–  Discs are recorded at a certain sampling 
rate. The higher the sampling rate, the better 
sound quality. LPCM Output can be selected 
only when PCM Only is activated.
Using the Video setup menu
A
 Press SETUP on the remote control.
 
The system setup menu appears.
General
Audio
Video
Preference
TY Type
TV Display
Progressive
- - Video Setup Page   - -
Closed Captions
Sharpness
Brightness
Contrast
Color
B
 Press W X to select { Video Setup 
Page }.
C
 Press S T to select an item, then press 
X to access.
Example: { TV Display }
 
The options for the selected item 
appears.
 
If the selection in the menu is greyed 
out, that means the feature is not 
available or not possible to change at 
the current state.
D
 Use S T to select a setting and press 
OK to confi rm.
Example: { 4:3 Pan Scan }
 
The setting is selected and setup is 
complete.
E
  To exit, press SETUP.
01-41_dvp1013_F7_eng.indd   31
01-41_dvp1013_F7_eng.indd   31
12/16/2008   1:41:06 PM
12/16/2008   1:41:06 PM