Talkswitch TS-50e CT-TP001-107001 Leaflet

LED Expansion Module: 

12-Key Paper Label

TS-50e Expansion Module

The expansion module for the TS-550i phone provides 12 additional
line/programmable feature keys for your phone. You can place
the phone and expansion module on your desktop or you can
wall-mount the phone and expansion module.

Up to two expansion modules are supported on a single phone.
The expansion modules are only supported on the TS-550i phone.

Caution! To avoid damaging equipment, remove the power from
the IP phone before connecting an expansion module. To install
this expansion module correctly, please follow the procedures below.

1. Remove power from the phone. 

2. Remove the stand from the phone.

3. At the back of the phone, remove the rubber plug from the

Accessory Expansion Module (AEM) port.

4. Plug the 12-pin cable from the expansion module into the

AEM port on the back of the phone.

5. Place the connecting arm of the expansion module behind the

IP phone and align the expansion module connecting holes
with the connecting holes on the back of the phone.

6. Use the provided screws to connect the expansion module and

phone firmly together.