Wi-Ex YX024-PCS Leaflet
© 2013 Wi-Ex
V 0113
YX024-PCS -
Directional Indoor Base Antenna
Mounting the Base Unit and Directional Antenna
For best performance, the antenna should be mounted with the cable pointing down. Avoid
pointing the antenna within 2 feet of other wires or metal objects.
pointing the antenna within 2 feet of other wires or metal objects.
The YX024-PCS directional antenna replaces the omni-directional indoor antenna and connects to the
base unit providing 7 dBi of gain and features a wide, horizontal beamwidth of 110º. It is designed to
provide maximum PCS coverage in the direction it is pointed. Therefore, it is best to mount it on the wall
that is facing your critical coverage area.
base unit providing 7 dBi of gain and features a wide, horizontal beamwidth of 110º. It is designed to
provide maximum PCS coverage in the direction it is pointed. Therefore, it is best to mount it on the wall
that is facing your critical coverage area.
Wall Mounting the YX024 Antenna
Once you have found the location where the Directional Antenna provides the desired coverage, mount
the Antenna using the included hardware:
the Antenna using the included hardware:
1) Drill 4 - 3/16" (.48cm) holes for each anchor
2) Use the self-tapping wall/ceiling anchors to fasten the mounting bracket to the wall so flat end of
2) Use the self-tapping wall/ceiling anchors to fasten the mounting bracket to the wall so flat end of
the bracket is on top
3) Snap the antenna onto the mounting bracket and attach the cable cover to the base
YX024-PCS Specifications
Frequency
1850-1990 MHz
Gain
7 dBi
Beamwidth
110 degrees
Polarization
Horizontal
Dimensions
5.75”L x 3.75”W x 1.5”D
Weight
0.44 lbs.
Connector
TNC male on 9” connecting coax
Mounting
May be attached to walls and other surfaces with removable mounting bracket