Revolabs 3.5mm Unbalanced Male Connector to RCA Male Connector 07-35MUTORCA-01 User Manual

 

 

 

Revolabs now offers a variety of accessory cables as part of the product line. These 

cables allow you to easily connect your HD Single/Dual Channel or Fusion System to a 
variety of video codecs, audio systems, computers, and other audio  solutions.  
 
 

With a Revolabs Microphone System, it is important to have all the parts fully 

functioning in order to achieve success with your AV solution. The cables and wires are a key 
part of the solution. Using the incorrect cable with an incorrect wiring structure will render the 
system useless.  
 

 

 

The Revolabs HD Single/Dual Channel System is designed with 3.5mm balanced 

inputs and outputs. This connector is often confused with a 3.5mm stereo connector as it 
appears the same, but is wired very differently.   

Accessory Cable Guide 

 

The Revolabs HD Single/Dual Channel Base Station can accept a balanced or 

unbalanced 3.5mm plug, but will not function correctly with a stereo 3.5mm plug. The use of a 
stereo 3.5mm plug into the HD Single/Dual Channel Base Station will result in either poor 
audio or no audio, depending on what device is connected at the other end of the cable.  
 
 

The specifications for each cable, as well as a cross-reference guide for different AV 

solutions, is attached. Please use the cross reference guide to determine the appropriate 
cable for your AV solution.  
 
 

If you have any questions about which cable to use or would like to find out how you 

can purchase the correct cable, please call Revolabs at 1-800-326-1088.  

Positive + 

Negative - 

Shield (GND) 

Left + 

Right + 

Shield (GND) 

Rev 1.2 2/12/10