Valcom V-1030M Leaflet

The 5-Watt Amplified Horn, Model V-1030C, shall be an FCC registered, weather-resistant, high efficiency reentrant

type horn with high frequency diffuser.  It shall be equipped with an amplifier, externally accessible volume control. It shall
include a detachable base for wall or single, double or octagon electrical box mounting and omni-directional ball joint mounting
bracket to allow precise positioning in the vertical and horizontal planes with a single adjustment.  An I-beam mounting clamp
shall also be provided.  The FCC registration number shall be BAFUSA-69358-KX-N.

The frequency response shall by 225 Hz to 14 kHz.  Dispersion shall be 120 horizontal and 90° vertical.  Sound

pressure level shall be 116 dB measured at 4 feet (1.22 m) on axis with an input to the amplifier module being -10 dBm at 1 kHz.
Distortion shall be less than 2.05 at rated output of 5 watts RMS.  Output load shall be 8 ohms.  Input impedance shall be 600
ohms nominal.  The amplifier shall operate on a -24 Vdc nominal, positive ground power supply.  Operating current shall be 300
mA at -24 Vdc.  Operating temperature shall be -4 to 131 °F (-20 to 55 °C).  Operating humidity shall be 0-95% noncondensing.

The horn shall be constructed of high impact ABS plastic.  The mounting base shall be constructed of LEXAN

®

 

an ultra

high impact material which is stronger and tougher than die casting.  The finish shall be beige with brown accent.  The I-beam
mounting clamp shall be constructed of zinc chromate plated steel.

Dimensions of the horn shall be 7.38" (18.75 cm) H x 10.0" (25.40 cm) W x 10.5" (26.67 cm) D.  Shipping weight shall

be approximately 4.75 lbs (2.2 kg).

LEXAN

® Registered Trademark of General Electric Co.

Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of nor-

mal use and service for a period of one year from the date of shipment.  The obligation under this warranty shall be limited to the re-
placement, repair or refund of any such defective device within the warranty period, provided that:

1.  inspection by Valcom, Inc. indicates the validity of the claim,

2.  the defect is not the result of damage, misuse, or negligence after the original shipment,

3.  the product has not been in any way repaired by others and that factory sealed units are unopened.
    (A service charge plus parts and labor will be applied to units defaced or physically damaged).

4.  freight charges for the return of products to Valcom, Inc. are prepaid,

5.  all units “out of warranty” are subject to a service charge.  The service charge will cover minor repairs
    (major repairs will be subject to additional charges for parts and labor).

This warranty specifically excludes damage incurred in shipment.  In the event a product is received in damaged condition, the

carrier should be notified immediately.  Claims for such damage should be filed with the carrier involved in accordance with the F.O.B.
point.