Dotworkz D3-HB-MVP Leaflet

Page of 1
D3-HB-MVP
: Dotworkz D3 Heater Blower Camera Enclosure with MVP
www.dotworkz.com  
 866.575.4689
innovative        
remote video solutions
Features:
•  Thermostatically controlled Heater Blower System
•  Virtually indestructible Polycarbonate Thermal Plastic alloy
•  Designed to work with all brands of IP and analog PTZ cameras
•  Internal bracket included for perfect fit for PTZ, megapixel or
mini domes
•  Switchable upper and lower camera mounting locations for
maximum versatility and internal storage space
•  Internal mounting space for: routers, cell networks, hard drives,
UPS, WiMAX, mesh hardware, etc
•  IP66 rated against dust, water and salt water air
•  IP68 water proof connection ports included
•  60% bigger then our D2 models perfect for adding Wireless,
camera and NVR as a single install system
Description
:
The D3-HB-MVP is compatible with
virtually every IP and analog PTZ
camera on the market, now with MVP
to work with all input and camera
voltages. Made from impact resistant
Polycarbonate Thermal Plastic.
The ultimate barrier to protect cam-
era and other sensitive components
from harsh environments. Heater
& Blower is designed for weather
conditions ranging from freezing to
hot climates.
IP
66
OUTDOOR RATED
Versatile, Virtually Indestructible 
and Ready for the Extreme
Not just a camera enclosure but an
engineered outdoor housing system that
is designed to expand all indoor camera
models into complete rugged outdoor
system solutions.
Virtually Indestructible: We produce the
world’s toughest enclosures. They will
not corrode, rust, leak and have proven to
withstand a whole world of abuse.
No matter the climate we take outdoor
temperature protection very seriously:
Extreme Hot climates, Cold climates, Marine
and everywhere in between.
Specs
:
Operating Temperature (Absolute/Rec.):
-25° to 140° F (-32° C to 60° C)
0° to 120°F (-17°C to 49°C)
Power Consumption:
2 amps @ 115 VAC typical at full load
MVP Input Power Source Options:
24VAC/VDC 110 VAC, or 220 VAC
MVP Output Options for Camera Power:
12VDC, 24V
Internal Power Available for Camera:
2.25 amps @ 12 VDC on typical model
Shipping:
22” x 13” x 16” - 13 lbs (5.9 Kg)
MULTI        VOLT       PLATFORM
•  Universal input voltages options:
24 VAC/VDC, 110 - 220 VAC
•  12 VDC and 24 V camera and
component power
•  Easier, faster installation process -
less time
•  Works with most camera brands
and models
Standard with