Toshiba 212 User Manual

When This Message Appears    179

Toner not recognized

The toner cartridge is not 
installed correctly.

Install the toner cartridge correctly.

A toner cartridge not recom-
mended by TOSHIBA is 
being used.

If you are using a toner cartridge other 
than the one we recommend, the equip-
ment may not be able to detect whether it 
is installed or not.

 P.14 “Recommended toner cartridges”

Toner empty

The toner in the toner car-
tridge has run out.

Replace the toner cartridge with a new 
one. 

 P.192 “Replacing Toner Cartridge”

Invalid Dept.Code

The department code 
entered in the department 
code entering screen is not 
correct.

Enter the correct department code. If you 
do not know the department code, contact 
your administrator.

Memory is full

The built-in memory of the 
equipment has become full.

Select “Print” on the LCD screen to copy 
the data scanned so far. Select “Cancel 
job” to delete all the data scanned so far.

Clear paper output tray:
PRESS START KEY.

Approx. 250 sheets of paper 
have continuously exited and 
the equipment stops copy-
ing to prevent the copied 
paper from overflowing from 
the tray.

Remove the paper from the receiving tray, 
and then press the [START] button. Copy-
ing resumes. 
Press the [CLEAR/STOP] button to end 
the copy job. “Memory clear?” appears on 
the LCD screen. Select “YES”, and then 
press the [START] or [ENTER] button.