Toshiba 212 User Manual

Using Bypass Tray    63

If the paper size has already been registered, the following menu is displayed.
In this case, proceed to step 5.

If the paper size has not been registered, the following menu is displayed.
In this case, proceed to step 3.

Press the selecting button B or C to select the size of paper placed in the drawer. This 
can also be done with the 

 or 

 button. Then press the [ENTER] button.

e.g.) Setting LT size

When the paper is other than standard sizes, select “NON_SIZE”.

Press the selecting button C to select paper type. This can also be done with the 

 or 

 button. Then press the [ENTER] button.

e.g.) Thick paper (21 to 28 lb. Bond)

You can select the media type from the following four:

THICK PAPER 1: Thick paper (21 to 28 lb. Bond)
THICK PAPER 2: Thick paper (29 lb. Bond to 90 lb. Index), sticker labels
TRANSPARENCY: Overhead transparencies
PLAIN: Plain paper (17 to 20 lb. Bond), tracing paper

If you select a different media type from the one you placed on the bypass tray, this could 
cause a paper jam or the quality of the copied image could be lowered.

1

100%

SORT

ZOOM

FINISHING

EDIT

Ready for bypass

Select paper size

NON_SIZE

COMP
13LG

Select paper size

LT

LD
LG

PAPER TYPE

THICK PAPER1

THICK PAPER2
TRANSPARENCY