Toshiba DK Admin User Manual
System/Station Administration
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
54
DKAdmin/DKBackup
Flexible Button Assignments (F5)
➤
To view or change flexible button assignments
1. Press
F5
from the Port
Attributes screen and the
Port Flexible Key
Assignments screen
displays (shown right).
Port Flexible Key
Assignments screen
displays (shown right).
2. To change a flexible
button assignment,
highlight the Flexible
Key Assignment and
press:
highlight the Flexible
Key Assignment and
press:
♦
F5
–Pause to
deactivate or blank
out a key
assignment.
out a key
assignment.
♦
F9
–Increment SD to add multiple speed dial key assignments.
Important!
You can only use this key when you are assigning more than one speed dial key at
a time. If you have not just added a speed dial key assignment, the message
a time. If you have not just added a speed dial key assignment, the message
Must
Assign System/Station Speed Dial First
displays.
If you leave the cursor in the same field and continue to press
F8
, the speed dial
key number increments. To add consecutive speed dial key assignments, you must
continue to highlight the next field before pressing
continue to highlight the next field before pressing
F8
.
3. Press
Esc
to return to the Port Attributes screen.
Important!
●
After restoring flexible keys (Program 39) data, turn the DK system off for five seconds,
then turn it back on to apply the changes made.
then turn it back on to apply the changes made.
●
If you change the keystrip type (Program 38) from the station attribute screen, all keystrip
buttons will be set to Program 38 default assignments. If you wish to change a keystrip
type (from 20 to 10, for example) and save the existing (first 10) key button assignments,
operate Program 38 from the Program Administration Section option.
buttons will be set to Program 38 default assignments. If you wish to change a keystrip
type (from 20 to 10, for example) and save the existing (first 10) key button assignments,
operate Program 38 from the Program Administration Section option.
➤
To copy selected keys to selected ports
1. Press
Ctrl
+
F2
and a pop-up dialog
box displays (shown at right).
2. Press any key to continue.
3. Highlight a key and press the spacebar
to select. An asterisk appears next to
your selection. Continue until all the
keys you want to copy have been
selected.
your selection. Continue until all the
keys you want to copy have been
selected.
Get user manuals:
See SafeManuals.com