Toshiba SD-P4000 User Manual
49
Others
Playback does not start when the
title is selected.
title is selected.
• Check the RATING LEVEL setup.
Audio soundtrack and/or subtitle
language is not changed when
you play back a DVD.
language is not changed when
you play back a DVD.
• Multilingual language is not recorded on the DVD disc.
No subtitle.
• Some discs have no subtitles.
• Subtitles are cleared. Press the SUBTITLE button.
• Subtitles are cleared. Press the SUBTITLE button.
Playback doesn’t start.
• No disc is loaded.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
• The disc may be dirty. Clean up the disc.
• The unit cannot play CD-ROMs, etc.
No picture.
• TV/DVD selector is not set correctly.
No sound.
• Check the input selector of the amplifier is set properly.
• The unit is in the special playback mode.
• Select the correct Audio Output position on AV amplifier.
• The unit is in the special playback mode.
• Select the correct Audio Output position on AV amplifier.
Picture is distorted during fast
reverse/forward playback.
reverse/forward playback.
• The picture will be distorted occasionally.
Stopping playback, search, slow-
motion play, repeat play, or
program play, etc. cannot be
performed.
motion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
No on-screen display.
• Select Display On.
No surround sound.
• The setup does not match your stereo system.
The remote control does not
function.
function.
• Aim the remote control at the remote sensor.
• Operate within approx. 5 meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
• Operate within approx. 5 meters or reduce the light in the room.
• Clear the path of the beam.
• The batteries are weak. Replace the batteries.
• Check the batteries are inserted correctly.
The unit or remote operation key
is not functioning.
is not functioning.
• Turn off the unit and unplug the AC power cord for several min-
utes, then replug it.
31
7
8
8
31
–
33
16
16
44
16
13
–
–
Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc.
• The function is prohibited with the unit or the disc.
“
” appears on the screen.
–
45
38
38
37
33
SYMPTOMS
POSSIBLE SOLUTIONS
PAGE
REMOTE CONTROL
DVD
About the LCD
• The color LCD is manufactured using extremely high precision technology, but even so may include certain pixels
that do not operate properly (that do not light, that remain lit constantly, etc.). We do our best to keep the number of
these defective pixels to a minimum, but please understand that they cannot be completely eliminated even with the
most advanced manufacturing technologies available today.
these defective pixels to a minimum, but please understand that they cannot be completely eliminated even with the
most advanced manufacturing technologies available today.
• The fluorescent tube which illuminates the panel from the inside will deteriorate with use. (The standard life length is
about 10,000 hours of continuous use at normal temperature.) When the LCD becomes dim, flickers, or does not
illuminate, contact your dealer for replacement.
illuminate, contact your dealer for replacement.
• The brightness of the LCD monitor differs slightly depending on the viewing angles. Adjust the angle to obtain the
best viewing. (The recommended angle is 90 degrees to the monitor.)
J5N00201A [E] (P47-51)
6/8/04, 4:22 PM
49