Toto MS990CG User Manual
19
To turn off the Auto OPEN/CLOSE function
Push the desired button
on the remote controller
on the remote controller
Push the Auto OPEN/CLOSE button on the
remote controller to stop the Auto
OPEN/CLOSE.
remote controller to stop the Auto
OPEN/CLOSE.
●
The Auto “OPEN/CLOSE" will disappear from the
remote control display.
remote control display.
●
To turn the Auto Seat and Lid “OPEN/CLOSE” on
again, repeat this operation.
again, repeat this operation.
●
The Motion detection sensor detects when someone stands in front of the toilet.
●
The Motion detection sensor projects an infrared light as shown in the figure below.
When someone stands in line with the infrared light, movement is detected by the sensor.
When someone stands in line with the infrared light, movement is detected by the sensor.
About the Motion detection sensor:
Motion detection sensor
The lid is close
Motion detection sensor
The lid is open
The Auto Seat and Lid
"OPEN/CLOSE"
disappears
Operation
●
When the motion detection sensor fails to detect motion, the "sensor" light on the Main Unit Display will go out.
●
If you do not sit or stand for more than 6 seconds, the seat and lid will close after 5 minutes.
After using the toilet,
move at least 1 foot away
from the toilet.
move at least 1 foot away
from the toilet.
The toilet seat and lid will automatically
close after 90 seconds.
close after 90 seconds.
● Raise the toilet seat with the Remote
Controller. You must stand in front of the
toilet for at least 6 seconds or the lid will not
automatically close.
toilet for at least 6 seconds or the lid will not
automatically close.
When Standing in Front of the Toilet
(light goes out)
Motion Detection
Sensor