TP-LINK TD-W8901N User Manual

 

40 

 

The WPS Configuration Screen of Wireless Adapter 

)

 

The default PIN code of the Router can be found in its label or the WPS configuration screen 
as Figure 4-23. 

• 

SSID: Wireless network name shared among all points in a wireless network. The SSID 
must be identical for all devices in the wireless network. It is case-sensitive and must not 
exceed 32 characters (use any of the characters on the keyboard). Make sure this setting 
is the same for all stations in your wireless network. Type the desired SSID in the space 
provided. 

• 

Authentication Type: Select an authentication type from the drop-down list, which 
allows you to configure security features of the wireless LAN interface. Options available 
are: Disabled, WEP-64Bits, WEP-128Bits, WPA-PSK, WPA2-PSK, and WPA-PSK/ 
WPA2-PSK.  

¾

  WDS Settings: Select On/Off to enable/disable WDS. With this function enabled, the Router 

can bridge two or more WLANs. 

• 

MAC Address: Enter the MAC Address you wish to bridge in the field. 

¾

  Wireless MAC Address Filter: Wireless access can be filtered by using the MAC addresses 

of the wireless devices transmitting within your network’s RADIUS.   

• 

Active: If you wish to filter users by MAC Address, select “Activated”, and “Deactived” for 
don’t. 

• 

Action: To filter wireless users by MAC Address, select “Allow Association” or “Deny 
Association” the follow Wireless LAN station(s) association.